The large volume production of flexible electronics by solution based roll-to-roll (R2R) manufacturing technologies is a promising upscaling strategy for the organic electronics industry. Typical optoelectronic devices like organic light emitting diodes (OLEDs) consist of a complex stack of functional layers. Solution deposition of these structures eliminates the need for expensive vacuum processing. This contribution presents approaches for solution based R2R production methods of functional OLED layers on flexible polymer substrates. The development of a R2R line with two slot-die coating stations is discussed which can deposit two uniform layers consecutively in a single run (“tandem coating”) at web speeds up to 30 m/min. Furthermore, it offers the unique feature that there is no contact between the rollers and the top side of the substrate where the functional coating is deposited. Thereby, an important source of particle contamination and other damage to the device is eliminated. In addition to continuous deposition, stripe and intermittent coating techniques have been developed, allowing the production of patterned layers. Finally, examples will be shown of OLEDs where two functional materials are deposited by R2R processing from solution.@en

The feasibility of upscaling the perovskite solar cells technologies to high volume production using roll-to-roll (R2R) slot die coating is demonstrated in this study. Perovskite solar cells are produced by R2R slot die coating on flexible substrates with a width of 30 cm and the web speed of 3–5 m min−1. R2R deposition of the electron transport layer and perovskite is performed at ambient atmosphere from nontoxic solvents compatible with industrial manufacturing. The average stabilized power conversion efficiency of the devices made on different areas of the foil is 12%, with the best value of 13.5%. The demonstrated achievement is an important milestone and a big solid step toward future commercialization of perovskite-based solar cells technologies.@en