In this study, the full-focusing (FF) algorithm is reviewed with the objective of optimizing it for processing data from different types of surfaces probed in altimetry. In particular, this work aims to provide a set of optimal FF processing parameters for the Sentinel-6 Michael Freilich (S6-MF) mission. The S6-MF satellite carries an advanced radar altimeter offering a wide range of potential FF-based applications which are just beginning to be explored and require prior optimization of this processing. In S6-MF, the Synthetic Aperture Radar (SAR) altimeter acquisitions are known to be aliased in the along-track direction. Depending on the target, aliasing can be tolerated or may be a severe impairment to provide the level of performance expected from FF processing. Another key aspect to consider in this optimization study is the unprecedented resolution of the FF processing, which results in a higher posting rate than the standard SAR processing. This work investigates the relationship between posting rate and noise levels and provides recommendations for optimal algorithm configurations in various scenarios, including transponder, open ocean, and specular targets like sea-ice and inland water scenes. The Omega–Kappa (WK) algorithm, which has demonstrated superior CPU efficiency compared to the back-projection (BP) algorithm, is considered for this study. But, unlike BP, it operates in the Doppler frequency domain, necessitating further precise spectral and time domain settings. Based on the results of this work, real case studies using S6-MF acquisitions are presented. We first compare S6-MF FF radargrams with Sentinel-1 (S1) images to showcase the potential of optimally configured FF processing. For highly specular surfaces such as sea-ice, distinct techniques are employed for lead signature identification. S1 relies on image-based lineic reconstruction, while S6-MF utilizes phase coherency of focalized pulses for lead detection. The study also delves into two-dimensional wave spectra derived from the amplitude modulation of image/radargrams, with a focus on a coastal example. This case is especially intriguing, as it vividly illustrates different sea states characterized by varying spectral peak positions over time.@en

This study investigates the influence of ocean currents on wave modeling and satellite observations using in situ wave measurements from the One Ocean Expedition 2021–2023. In January 2023, six OpenMetBuoy drifters were deployed in the Agulhas Current region. Their high immersion ratio minimized wind effects, allowing them to follow the current and return to the Indian Ocean by the Agulhas retroflection, collecting data for about 2 months. Comparing surface current velocities from both the Mercator model and Globcurrent product with drifter data reveals underestimation for velocities over (Formula presented.) with Mercator showing greater variability. Significant wave height and Stokes drift parameters from MFWAM and ERA5 were also evaluated against drifters. Both models tend to overestimate Stokes drift more noticeable in ERA5, indicating sensitivity to wind seas. For significant wave height, both models agree well with drifter measurements with correlations of 0.90 for MFWAM and 0.83 for ERA5. However, ERA5's lack of surface current data combined with its coarse resolution (0.5 (Formula presented.)) lead to underestimation of wave heights exceeding 2.5 m. MFWAM products including and excluding currents exhibit root mean square errors of 0.39 and 0.45 m, respectively, when compared to drifter measurements. This confirms that neglecting currents introduces additional errors particularly in areas with sharp current gradients. Analyzing MFWAM wave spectra, including and excluding currents, reveals wave energy transfer attributed to wave-current interactions. The spatial extent of these interactions is captured by satellite altimeters, revealing wave modulations with considerable wave height variations when waves cross eddies and the current core.

@en

Given the considerable range of applications within the European Union Copernicus system, sustained satellite altimetry missions are required to address operational, science and societal needs. This article describes the Copernicus Sentinel-6 mission that is designed to provide precision sea level, sea surface height, significant wave height, inland water heights and other products tailored to operational services in the ocean, climate, atmospheric and land Copernicus Services. Sentinel-6 provides enhanced continuity to the very stable time series of mean sea level measurements and ocean sea state started in 1992 by the TOPEX/Poseidon mission and follow-on Jason-1, Jason-2 and Jason-3 satellite missions. The mission is implemented through a unique international partnership with contributions from NASA, NOAA, ESA, EUMETSAT, and the European Union (EU). It includes two satellites that will fly sequentially (separated in time by 5 years). The first satellite, named Sentinel-6 Michael Freilich, launched from Vandenburg Air Force Base, USA on 21st November 2020. The satellite and payload elements are explained including required performance and their operation. The main payload is the Poseidon-4 dual frequency (C/Ku-band) nadir-pointing radar altimeter that uses an innovative interleaved mode. This enables radar data processing on two parallel chains the first provides synthetic aperture radar (SAR) processing in Ku-band to improve the received altimeter echoes through better along-track sampling and reduced measurement noise; the second provides a Low Resolution Mode that is fully backward-compatible with the historical reference altimetry measurements, allowing a complete inter-calibration between the state-of-the-art data and the historical record. A three-channel Advanced Microwave Radiometer for Climate (AMR–C) provides measurements of atmospheric water vapour to mitigate degradation of the radar altimeter measurements. The main data products are explained and preliminary in-orbit Poseidon-4 altimeter data performance data are presented that demonstrate the altimeter to be performing within expectations.

@en

The Sea surface KInematics Multiscale monitoring (SKIM) satellite mission is designed to explore ocean surface current and waves. This includes tropical currents, notably the unknown patterns of divergence and their impact on the ocean heat budget near the Equator, monitoring of the emerging Arctic up to 82.5$(\circ)$N. SKIM will also make unprecedented direct measurements of strong currents, from boundary currents to the Antarctic circumpolar current, and their interaction with ocean waves with expected impacts on air-sea fluxes and extreme waves. For the first time, SKIM will directly measure the ocean surface current vector from space. The main instrument on SKIM is a Ka-band conically scanning, multi-beam Doppler radar altimeter/wave scatterometer that includes a state-of-the-art nadir beam comparable to the Poseidon-4 instrument on Sentinel 6. The well proven Doppler pulse-pair technique will give a surface drift velocity representative of the top two meters of the ocean, after subtracting a large wave-induced contribution. Horizontal velocity components will be obtained with an accuracy better than 7 cm/s for horizontal wavelengths larger than 80~km and time resolutions larger than 15 days, with a mean revisit time of 4 days for of 99\% of the global oceans. This will provide unique and innovative measurements that will further our understanding of the transports in the upper ocean layer, permanently distributing heat, carbon, plankton, and plastics. SKIM will also benefit from co-located measurements of water vapor, rain rate, sea ice concentration, and wind vectors provided by the European operational satellite MetOp-SG(B), allowing many joint analyses. SKIM is one of the two candidate satellite missions under development for ESA Earth Explorer 9. The other candidate is the Far infrared Radiation Understanding and Monitoring (FORUM). The final selection will be announced by September 2019, for a launch in the coming

@en