Bioaugmentation is a promising technology to enhance the removal of specific pollutants; however, environmental impacts of implementing bioaugmentation have not been considered in most studies. Appropriate methodology is required for the evaluation from both in-depth and comprehensive perspectives, which leads to this study initiating the application of life cycle assessment (LCA) of bioaugmentation. Two LCA methods (CML and e-Balance) were applied to a bioaugmentation case with the aim of illustrating how to evaluate the environmental impacts of bioaugmentation from different perspectives based on the selection of different LCA methods. The results of the case study demonstrated that the LCA methods with different methodology emphasis produced different outcomes, which could lead to differentiated optimization strategies depending on the associated perspectives. Furthermore, three important aspects are discussed, including coverage of impact categories, the selection of characterization modeling for specific pollutants, and the requirement of including economic indicators for future investigation.@en

This paper explores the sustainability aspects of binders used in concrete 3D concrete printing. Firstly, a prospective approach to conduct sustainability-assessment based on the life cycle of 3D printed structures is presented, which also highlights the importance of considering the functional requirements of the mixes used for 3D printing. The potential of the material production phase is emphasized to enhance the sustainability potential of 3DCP by reducing the embodied impacts. The literature on the different binder systems used for producing 3D printable mixtures is reviewed. This review includes binders based on portland cement and supplementary cementing materials (SCMs) such as fly ash, silica-fume and slag. Also, alternative binders such as geopolymer, calcium sulfo-aluminate cement (CSA), limestone calcined clay cement (LC3) and reactive magnesium oxide systems are explored. Finally, sustainability assessment by quantifying the environmental impacts in terms of energy consumed and CO2 emissions of mixtures is illustrated with different binder systems. This paper underlines the effect of using SCMs and alternative binder systems for improving the sustainability of 3D printed structures.@en

BACKGROUND: Many occupations require workers to stand for prolonged periods, which can cause discomfort, pain and even injures. Some supermarkets in life provide a foot pad for checkout staff to let them stand on it at work, thereby reducing standing fatigue caused by standing for a long time. The inclined platform is the same as the foot pad mentioned above. That is, the staff stepped on it and relieved standing fatigue to a certain extent. OBJECTIVE: The study aims to analyze how the standing angle affects fatigue among prolonged standing workers and tries to find an inclined platform with a specific angle to reduce standing fatigue. METHODS: This experiment studied fatigue of the inclined platforms with different angles on prolonged standing workers, eight participants were selected to participate in the test. The plantar pressures and sEMG (Surface Electromyography) were used to collect the physiological information change of prolonged standing participants in the lower limb and waist. The visual analogue scale was used as a subjective method to measure the psychological fatigue. RESULTS AND CONCLUSION: The study highlights the relationship between standing angle and lower limb fatigue. The inclination of the standing platform has different effects on the participants under different time conditions. When participants stand on inclined platforms at 0°, 5° and 10°, the iEMG (Integrated Electromyography) values of the gastrointestinal muscle were not significantly different until the third sampling point (40 minutes). After that self-regulation of lower limb muscles is better when standing on an inclined platform between 5° and 10°, it has a certain effect on alleviating lower limb fatigue. This knowledge is crucial for the design of the inclined working platforms fitting the needs of prolonged standing workers.@en

The increasing salinity in aquatic environments has had a negative impact on the biodegradation of atrazine, an extensively used herbicide which has been proven to pollute soil and water ecosystems. In the present study, a novel atrazine-degrading strain (ZXY-2) was isolated from industrial wastewater and identified as the Arthrobacter genus with the 16S rRNA gene. Results indicated that the strain showed a high salinity tolerance, and was able to tolerate NaCl concentrations up to 10% (w/w). Plackett–Burman (PB) multifactorial design and response surface methodology (RSM) were then employed to optimize the culturing conditions. Results showed that among the selected fifteen factors, six contributing factors were obtained. Subsequently, by employing the RSM to model and optimize atrazine degradation, a biodegradation efficiency of 12.73 mg L−1 h−1 was reached under optimal conditions (34.04 °C, pH 9.0, inoculum size 10% (v/v), 2.212 g L−1 of sucrose, 6 g L−1 of Na2HPO4·12H2O, and 50 mg L−1 of atrazine). In addition, a statistically quadratic polynomial mathematical model was suggested (R2 = 0.9873). In contrast to other atrazine-degrading bacteria, ZXY-2 appears to be adapted to life under high salinity conditions and sustains excellent atrazine degradation performance. Therefore it could potentially be applied in atrazine bioremediation.@en