Achieving operational stability at high current densities remains a challenge in CO2 electrolyzers due to flooding of the gas diffusion layer (GDL) that supports the electrocatalyst. We mitigated electrode flooding at high current densities using a vacuum-assisted infiltration method to embed 200-400 nm-sized polytetrafluoroethylene (PTFE) particles at the interface of the microporous layer (MPL) and carbon cloth in a commercial GDL. In CO2 electrolysis to CO over a silver nanoparticle catalyst on the GDL, the PTFE-embedded GDL not only just exhibited less than 10% of the electrolyte seepage rates observed in untreated GDLs at a current density of 300 mA·cm-2 but also expanded the electrochemical active area across the testing conditions. The PTFE-embedded GDL also maintained a Faradaic efficiency for CO2 electrolysis to CO above 80% for more than 100 h at 100 mA·cm-2, which was a 50-fold improvement in the stable operation time of the electrolyzer.