In this paper, bistatic interferometry using fixed-receiver configurations is addressed both theoretically and experimentally. The analytical expressions for interferometric phase and height sensitivity are derived, and a full interferometric processing chain for digital elevation model (DEM) generation is presented. The derived expressions are general, and they can be applied to two possible acquisition geometries: backscattering and forward scattering. The theoretical developments are complemented with experimental results done with the bistatic receiver Synthetic Aperture radar Bistatic Receiver for INterferometric Applications. The obtained DEMs are compared with a DEM from the Shuttle Radar Topography Mission and a digital terrain model from the Institut Cartografic de Catalunya. The comparison allows one to validate the results and demonstrate to which particular features of the scene that the bistatic radar is sensitive.@en

This paper presents across-track tomography applied to a bistatic geometry with fixed receivers. This kind of geometry can overcome some of the classical monostatic tomography limitations such as temporal decorrelation and irregular baseline distribution. The Remote Sensing Laboratory (RSLab) of the Universitat Politècnica de Catalunya (UPC) has implemented a SAR Bistatic Receiver for INterferometric Applications, SABRINA, with 4-channels. SABRINA has been used to carry out a bistatic tomographic experiment. The acquired data has been processed with different tomographic methods and their performances compared.@en

The Universitat Politecnica de Catalunya is developing a ground based bistatic system using ESA's ENVISAT and ERS-2 as transmitters. The spatial resolution of this configuration is similar to that of their monostatic counterpart, although foreshortening effects have a lesser impact. First single-pass interferometric images corresponding to a local test-site are presented and compared to a synthetic interferogram.@en

The presented work discusses the processing of repeat-pass interferometric data acquired with SABRINA (SAR Bistatic Receiver for INterferometric Applications), where the receiver is fixed and the baseline is due to the two different satellite orbits. The paper addresses the particularities of bistatic interferometry like the coregistration of the images and the decorrelation factors affecting the interferometric phase. Theoretical developments are complemented with the first repeat-pass results. The characteristics of the scene and the 35 days temporal baseline have caused the interferogram to be severely affected by the temporal decorrelation. This first result opens the discussion of what kind of targets are seen in a bistatic geometry and which of them can be coherent along time.@en

This paper gives a quick overview of inversion methods for bistatic tomographic processing. The methods are tested over simulated and real data. The real data has been acquired from a set of indoor experiments carried out in the Radiation Laboratory (RadLab), at the University of Michigan. A scale model with a house, some trees and a rough surface on the ground has been built to reproduce an urban scenario.@en

This paper characterizes the interferometric phase for a fixedreceiver bistatic SAR system. Also, the expressions for the interferometric phase and image resolution cell are summarized. It will be distinguished between two particular acquisition geometries : back-scattering and forward-scattering. A bistatic interferometric chain has been implemented whose particularities are discussed. The theoretical developments are complemented with the comparison of the Digital Elevation Models (DEM) generated from the bistatic interferometric data acquired with our fixed receiver, named SABRINA (SAR Bistatic Receiver for INterferometric Applications) with a SRTMDEM and a Digital Terrain Model (DTM) from the Institut Cartografic de Catalunya (ICC).@en

This paper presents an along - track interferometry (ATI) study for a bistatic or multiestatic SAR configuration with fixed ground receivers. This technique can be useful for sea current estimation or for any problem of Ground Motion Target Indicator (GMTI). The proximity of the ground receivers to the scene allows to be very sensitivite to velocities with small baselines. This paper also proposes a multibaseline approach for ATI able to diferenciate among different velocity contributions in the same resolution cell. At the end of this paper, some results over real acquired bistatic data will be presented and discussed. The data have been acquired using the C-band SAR Bistatic Receiver for INterferometric Applications (SABRINA) and ESAs ENVISAT satellite, as a transmitter of opportunity.@en

This paper presents an analysis of the performance of TerraSAR-X for subsidence monitoring in urban areas. The city of Murcia has been selected as a test-site due to its high deformation rate and the set of extensometers deployed along the city that provide validation data. The obtained results have been compared with those ob-tained from ERS/ENVISAT data belonging to the same period and validated with the in-situ measurements.@en

The paper presents the development of a ground based bistatic receiver using TerraSAR-X as a transmitter. The receiver subsystems like antennas, low-noise amplifiers, mixers, filters, synthesizers, etc. have been developed using low-cost monolithic devices in order to allow affordable deployment and at the same time offer final year students a challenging SAR engineering project. First raw data have been acquired on the Barcelona harbor area that has been focused producing geocoded images well matched with existing maps. A preliminary interferogram have been also produced.@en