Microgrids (MGs) are sustainable solutions for rural zone electrification that use local renewable resources. However, only careful planning at the start of an MG project can ensure its future optimal operation. In this paper, a novel methodology for MG planning by using the uncertainty characterization of renewable resources and demand is presented. Additionally, a model of electricity consumption is proposed and applied in an isolated rural community. In such communities, consumption patterns typically need to be derived as model inputs because consumption measurements are not available for the planning stage. To obtain these inputs, clustering algorithms based on self-organizing maps (SOMs) and fuzzy c-means are used to classify the families of the community given sociodemographic information obtained via surveys. Subsequently, Markov chains (MCs) are employed to generate consumption patterns based on consumption measurements in some dwellings and surveys applied to the community. The nonlinearities and uncertainties associated with renewable resources and consumption are modeled by using prediction interval (PI) models. These PI models provide the required consumption and generation scenarios for deriving the optimal sizing and topological information to address the MG planning problem. The results of the robust planning approach based on scenarios are useful at the feasibility and design phases of an MG project. The proposed methodology is successfully applied to MG planning for a rural Mapuche community, where a conservative criterion was considered to minimize the investment risk. This criterion corresponds to the worst-case scenario in which the demand increases by 19.9% compared to that of the baseline scenario and a lower energy cost is obtained. However, the net present cost and operational costs increase by 14% and 11.75% compared to those of the baseline scenario, respectively.@en

This study presents a novel load estimation method for isolated communities that do not receive energy or only receive it for a limited time each day. These profiles have been used to determine the installed capacity of generating units for microgrid electrification projects. The social characteristics and lifestyles of isolated communities differ from those in urban areas; therefore, the load profiles of microgrids are sensitive to minor variations in generation and/or consumption. The proposed methodology for obtaining the residential profiles is based on clustering algorithms such as k-means, a self-organizing map (SOM) or others. In this work, SOM clustering is considered because it allows a better interpretation of results that can be contrasted with social aspects. The proposed methodology includes the following components. First, the inputs are processed based on surveys of residents that live in each socio-economic level of housing and the community. Second, family types are clustered using an SOM, from which relevant information is derived that distinguishes one family from another. Third, the load profiles of each cluster are selected from a database. Additionally, social aspects and relevant energy supply information from communities with similar characteristics are used to generate the required database. The SOM for the clustering of families of the community with available energy measurements is used as an initial guess for the clustering of the families in the community with unknown energy measurements. The methodology is applied and tested in the community of El Romeral, Chile, where a microgrid will be installed. The SOM technique compares favorably with a benchmark method that uses the average load profile of a community; furthermore, the SOM clustering algorithm for the methodology is favorably compared with the k-means algorithm because the results obtained by SOM are consistent with the social aspects.@en