The rapid growth in world population and increasing demands have led to the lack of fresh water, taking a toll on several of earths reserves, mainly the fresh water supply reserves. Water stress deters economic growth, leads to conflicts and has a direct impact on the health of humans. Studies show the trends in the increase of water consumption per capita due to increase in higher standards of living over the last years, resulting in the decrease of usable high purity water. 97% of the world’s water supply is locked in the salted, often unusable oceans. In recent times, water stressed countries are using the saline water from the oceans and desalinating it to produce fresh water for domestic, industrial or agricultural use. The state-of-the art method for desalinating saltwater is by Reverse Osmosis (RO). The biggest drawback of this technology is its high energy consumption mostly provided by conventional sources like fossil fuels. Therefore, for a sustainable future, a renewable energy source must be integrated to power the RO system. Delft Offshore Turbine (DOT) is currently developing and testing a new hydraulic drive train solution for fluid power transmission in offshore wind turbines using seawater as the medium. A hydraulic positive displacement pump is driven by the DOT wind turbine creating a flow of sea water under high pressure. This high-pressure flow can be either directed to a RO unit to desalinate seawater or converted into electricity using a spear valve and pelton turbine generator. A major challenge while using wind as an energy source is its intermittency. Reverse osmosis plants are designed to operate at a fixed flow and pressure while due to the uncontrolled, varying nature of the wind, the pump output experiences fluctuations in both pressures and flows. The aim of this thesis is to analyze the steady-state behavior of the integrated system for wind speeds up to the turbine rated wind speed under different operating conditions. This is achieved by simulating the behavior of the DOT500 hydraulic drive train wind turbine coupled to a RO system with pressure exchanger energy recovery device and a nozzle with a pelton turbine generator. The main objective of this research is to build a numerical model in Python using algorithms to solve the system of steady-state equations and optimize the integrated system for maximum water and maximum electricity production at specified locations. The numerical model is simulated for all combinations of wind speeds and nozzle positions and the behavior of the high-pressure pump, RO system, pelton turbine and various system parameters are shown. A sensitivity study is performed for important desalination parameters and their effect on system performance is analyzed. This research has yielded three main conclusions / deliverables: 1. Behavior of the wind powered integrated system to produce freshwater and electricity at different operating conditions. 2. Steady state control of DOT500 turbine and behavior of the pelton turbine to produce either maximum electricity or maximum water. 3. Sensitivity of important desalination system parameters on overall system behavior for future optimization of RO membranes.