Calcium looping CO2 capture is a promising technology to reduce CO2 emissions from cement production. Coal is generally considered the fuel used to drive the calcium looping process as coal is already used as feedstock for cement production. This study assesses the impact of different fuels (coal, natural gas and woody biomass) on the technological and environmental performance of post-combustion calcium looping at a cement plant in North-western Europe. Process modelling is used to determine the impact of the different fuels on the mass and energy balance of the process. Life cycle assessment is carried out to evaluate the environmental performance of the different systems. Results indicate that firing natural gas or biomass instead of coal in an add-on calcium looping process can improve the efficiency of the process, as it decreases the fuel, limestone and electricity consumption. Consequently, while coal fired calcium looping can reduce life cycle climate change potential by 92%, the use of natural gas or biomass can make the process carbon neutral (reduction of 100%) or negative (-169%), respectively. Further research is required to complete the environmental perspective of using alternative fuels, but these results already illustrate a potential low-hanging fruit to improve the environmental performance of post combustion calcium looping in the cement industry.@en