Multiple parameter environment monitoring via wireless Internet of Thing sensors is growing rapidly, thanks to low power techniques of the node. More importantly, the ever more complex and highly efficient energy harvesting systems enable long-term continuous monitoring in inaccessible environments without needing to change the battery. This paper reviews existing energy harvesting modalities, including photovoltaic, piezoelectric, pyroelectric, electromagnetic, and vibration, together with circuit techniques of interfacing power management circuits for energy harvesters. Moreover, techniques used to interface with multiple mode energy harvesters to obtain a stable output power with optimal power efficiency are discussed as an emerging direction. The state-of-the-art energy harvesting systems together with future development trends are provided.

This article presents a fully dynamic scalable switched-capacitor delta-sigma modulator that achieves a 94.1-dB dynamic range (DR). Power-and- bandwidth scalability by only changing the clock frequency is achieved using a capacitively biased and swing-enhanced floating inverter operational transconductance amplifier (OTA). Fabricated in a 180-nm CMOS process, the prototype achieves an signal-to-noise-and-distortion ratio (SNDR) of >87 dB across 4× scaling from 100 to 400 kHz of the sampling frequency f_ S. At 200-kHz f_ S , it achieves an SNDR/DR of 89.3/94.1 dB while consuming 4 μ W , leading to a DR-based Schreier figure of merit (FoM) of 177.1 dB.

IoT sensing applications operating from batteries or harvested energy require microwatt data converters. To accurately measure small signals, they often need to achieve a high DR (>90dB) and better linearity than the transducers themselves (>14b) with a BW in the kHz range. IoT systems also often consist of multiple sensing modalities with different BW requirements and are often heavily duty-cycled to reduce power consumption. This paper presents a fully dynamic discrete-time delta-sigma modulator (DTDSM) that supports 4x bandwidth/power scaling without any programming overhead except for changing fs, using a capacitively biased swing-enhanced floating inverter amplifier (SEFIA). The prototype, fabricated in 180nm CMOS, consumes only 4μW at 800Hz BW and achieves >87dB SNDR over 2 octaves of fs, between 100 kHz and 400 kHz, and a DR of 94.1 dB while operating with an OSR of 125.