Gv
G.J.A. van den Eijnden
info
Please Note
<p>This page displays the records of the person named above and is not linked to a unique person identifier. This record may need to be merged to a profile.</p>
2 records found
1
In this comparative eco-design study, the environmental impact of LM’s 58.7 blade was assessed for multiple material composition and waste management scenarios. Material variations were largely focusses on the resin fraction of the blade. This is since the matrix has the biggest impact of all materials and has a big impact on the available waste management options that are available. Material and waste management scenarios were largely selected based on a literature review. This knowledge was combined with the knowledge and current direction of LM to determine the investigated scenarios. Life Cycle Assessment (LCA) methodology was applied to calculate the potential emissions and resulting environmental impacts. To calculate the impacts, the Ecoinvent 3.5 database was used in combination with the ReCiPe 2016 Life Cycle Impact Assessment (LCIA) methodology. Analysis showed that Sub Critical Water (SubCW) hydrolysis likely is the waste management method with the lowest impact for the current used glass fibre - polyester design. However, two design changes can potentially lead to big reductions in total single score impact scores. These two are: designing for reuse of blade sections and interchanging thermoplastic resin for the currently used thermoset polyester resin. Both are beneficial because of the relatively direct reuse/recycling of material. This research can be extended to more resin types and waste management methods of these resin types. This will shed a broader light on the matter. When waste management methods reuse methods should be prioritized over recycling methods and ’clean’ recycling methods (i.e. methods that do not lean on heavily polluting processes) over dirty recycling methods.
...
In this comparative eco-design study, the environmental impact of LM’s 58.7 blade was assessed for multiple material composition and waste management scenarios. Material variations were largely focusses on the resin fraction of the blade. This is since the matrix has the biggest impact of all materials and has a big impact on the available waste management options that are available. Material and waste management scenarios were largely selected based on a literature review. This knowledge was combined with the knowledge and current direction of LM to determine the investigated scenarios. Life Cycle Assessment (LCA) methodology was applied to calculate the potential emissions and resulting environmental impacts. To calculate the impacts, the Ecoinvent 3.5 database was used in combination with the ReCiPe 2016 Life Cycle Impact Assessment (LCIA) methodology. Analysis showed that Sub Critical Water (SubCW) hydrolysis likely is the waste management method with the lowest impact for the current used glass fibre - polyester design. However, two design changes can potentially lead to big reductions in total single score impact scores. These two are: designing for reuse of blade sections and interchanging thermoplastic resin for the currently used thermoset polyester resin. Both are beneficial because of the relatively direct reuse/recycling of material. This research can be extended to more resin types and waste management methods of these resin types. This will shed a broader light on the matter. When waste management methods reuse methods should be prioritized over recycling methods and ’clean’ recycling methods (i.e. methods that do not lean on heavily polluting processes) over dirty recycling methods.
Bachelor thesis
(2017)
-
Y.M. Blommert, R. Bosch, S. van der Velden, G.J.A. van den Eijnden, R.J.P. Giele, P. Goergen, J.M. Knepper, L. Paškauskas, T. de Reijer, F.A.A.S.D.T. Rometsch, A. Takken, O.K. Bergsma, J. Sinke
Pioneering in the aviation is dangerous, but its rewards might be worthwhile. What if the fuselage shape is challenged to be non-circular? A better volume efficiency, easier loading and a new perception of the future aircraft are within reach, but at what costs? Carry-on luggage is expected to increase in the future. Does that result in a new fuselage shape? This report shows the design process of a 200 passenger aircraft while challenging the fuselage shape and its material. Market analysis showed a great demand for sustainable, single aisle aircraft. The current competitors are the Airbus A320neo, Boeing 737MAX-8 and the Airbus A321neo. With the use of system engineering tools, such as a functional breakdown structure, a functional flow diagram and a budget breakdown, a conceptual design was constructed: the A342 Beeblebrox. It purpose is to be able to outperform state-of-the-art aircraft and remain competitive for the next 50 years. Therefore the propulsion & performance, the electronics and the control & stability were designed to surpass the current aviation standard. To this end, off the shelf geared turbofan engines are used because it has a surpassing specific fuel consumption (SFC) and an overall good performance. The A342 is slightly more stable and controllable, because of its longer fuselage length but its overall tail size is similar to the A321neo. The A342 is an All-Electric-Aircraft to reduce subsystem and fuel weight. Its accessabillity is comparable to state-of-the-art aircraft. The maintainability is slightly worse, because of the revolutionary fuselage shape, that requires more frequent checking. The direct operating costs were calculated to be comparable with the A320neo. And because the A342 can carry more payload over longer distances, this ensures its ability to outperform other aircraft. The interior is designed such to maximise volume efficiency per passenger. This defined the inner boundaries for the fuselage cross-section, for which a lightweight structure was created. From the pressurisation requirement, it follows, both analytically and using a finite element method, that rounder shapes cope better with stresses. However, the elliptical shapes might still be an option. An elliptical shape was calculated to be roughly 1500 kg heavier than the circular of the same material. The fuselage material will consist mainly of CFRP and AFRP (Carbon/Aramid Fibre Reinforced Plastics), due to their high strength and low density. For the aerodynamics of the fuselage Computational Fluid Dynamics simulation software (CFD) was used to calculate the pressure. Subsequently, the drag was calculated analytically. It can be seen that squarish fuselages decrease the wetted area which reduces the drag. The elliptical shape has an increased L/D-ratio (Lift over Drag ratio) of 2%. The final conceptual design of the A342 Beeblebrox is a 6-abreast single aisle airliner, featuring an elliptical fuselage shape with conventional tail, better SFC and all electric systems. Each passenger has 0.107 m3 overhead luggage storage and 0.05 m3 checked-in luggage. Finally, it can be concluded that the elliptical shape is feasible to compete with state-of-the-art aircraft.
...
Pioneering in the aviation is dangerous, but its rewards might be worthwhile. What if the fuselage shape is challenged to be non-circular? A better volume efficiency, easier loading and a new perception of the future aircraft are within reach, but at what costs? Carry-on luggage is expected to increase in the future. Does that result in a new fuselage shape? This report shows the design process of a 200 passenger aircraft while challenging the fuselage shape and its material. Market analysis showed a great demand for sustainable, single aisle aircraft. The current competitors are the Airbus A320neo, Boeing 737MAX-8 and the Airbus A321neo. With the use of system engineering tools, such as a functional breakdown structure, a functional flow diagram and a budget breakdown, a conceptual design was constructed: the A342 Beeblebrox. It purpose is to be able to outperform state-of-the-art aircraft and remain competitive for the next 50 years. Therefore the propulsion & performance, the electronics and the control & stability were designed to surpass the current aviation standard. To this end, off the shelf geared turbofan engines are used because it has a surpassing specific fuel consumption (SFC) and an overall good performance. The A342 is slightly more stable and controllable, because of its longer fuselage length but its overall tail size is similar to the A321neo. The A342 is an All-Electric-Aircraft to reduce subsystem and fuel weight. Its accessabillity is comparable to state-of-the-art aircraft. The maintainability is slightly worse, because of the revolutionary fuselage shape, that requires more frequent checking. The direct operating costs were calculated to be comparable with the A320neo. And because the A342 can carry more payload over longer distances, this ensures its ability to outperform other aircraft. The interior is designed such to maximise volume efficiency per passenger. This defined the inner boundaries for the fuselage cross-section, for which a lightweight structure was created. From the pressurisation requirement, it follows, both analytically and using a finite element method, that rounder shapes cope better with stresses. However, the elliptical shapes might still be an option. An elliptical shape was calculated to be roughly 1500 kg heavier than the circular of the same material. The fuselage material will consist mainly of CFRP and AFRP (Carbon/Aramid Fibre Reinforced Plastics), due to their high strength and low density. For the aerodynamics of the fuselage Computational Fluid Dynamics simulation software (CFD) was used to calculate the pressure. Subsequently, the drag was calculated analytically. It can be seen that squarish fuselages decrease the wetted area which reduces the drag. The elliptical shape has an increased L/D-ratio (Lift over Drag ratio) of 2%. The final conceptual design of the A342 Beeblebrox is a 6-abreast single aisle airliner, featuring an elliptical fuselage shape with conventional tail, better SFC and all electric systems. Each passenger has 0.107 m3 overhead luggage storage and 0.05 m3 checked-in luggage. Finally, it can be concluded that the elliptical shape is feasible to compete with state-of-the-art aircraft.