A lane-changing (LC) maneuver may cause the follower in the target lane (new follower) to decelerate and give up space, potentially affecting crash risk and traffic flow efficiency. In congested flow, a more aggressive LC maneuver occurs where the lane changer is partially next to the new follower and creates negative gaps, namely negative gap forced LC (NGFLC). Although NGFLC forms the foundation of sideswipe crashes, little has been done to address its impacts and the contributing factors. To tackle this issue, a total of 15,810 LC trajectory samples are extracted from three drone videos at different locations. These samples are categorized into NGFLC and normal LC groups for comparative analysis. Five commonly used conflict indicators are extended into two-dimensional to evaluate the crash risk of LC maneuver. The change of time gaps during LC maneuver are examined to quantify the impact of LC on traffic flow efficiency. We find that NGFLCs significantly increase crash risk, reflected by the number of hazardous LC events and potential crash areas compared to normal LC. Additionally, results reveal that both the lane changer and the new follower tend to maintain a larger time gap after NGFLCs. Factors including time headway, relative speed, and historical gaps in the target lane significantly affect NGFLC incidence. Once the movement of the leader in the original lane is taken into account, the prediction accuracy improves from 81% to 91%. The transferability tests indicate that the findings about the negative impact of NGFLC and the accuracy of its prediction model are consistent across different locations. These findings hold implications for driving assistance systems to better predict and mitigate NGFLCs.

To increase the efficiency and safety of expressway, this paper constructed a new intelligent connected cooperative vehicle infrastructure system and its effectiveness was verifid from both data and practical applications. Firstly, considering the convenience of using intelligent networking systems for public transportation, a new intelligent connected cooperative vehicle infrastructure system architecture was proposed by incorporating mobile communication methods. Then, the new system was illustrated from road side unit (RSU), on board unit (OBU) and data interaction. Additionally, to verify the effectiveness of the system, this paper proposes a two-stage model named Transformer Embedded Clustering- Hierarchical Density-Based Spatial Clustering of Applications with Noise (TEC-HDBSCAN) model to identify outliers in the trajectory data of vehicles collected by the system and obtain the speed sequence of the vehicle. Finally, data from actual testing scenarios was collected and a Best Worst Method-Improved Gray Relational (BWM-IGR) model was built to verify the effectiveness of the system. The results show that the established intelligent networked transportation system can effectively guide vehicles and collect data with high accuracy.

Lane-changing (LC) in congested traffic has been identified as a trigger for the sudden deceleration behavior of the new follower in the target lane, leading to severe traffic disturbances. Thus, investigating the response of the new follower to an LC maneuver is an important research topic in the literature. To date, numerous efforts have been devoted to understanding the impact of the lane changer on the new follower after the insertion, while less attention has been given to this influence during the pre-insertion stage (anticipation). Therefore, this paper aims to establish a new car-following (CF) model to capture the new follower's driving behavior during anticipation. Specifically, we introduce an attention mechanism deviating from Newell's CF rules to quantify the impact of anticipation. Then, we apply a neural network with an attention layer to estimate the attention mechanism and incorporate it into the Newell CF model, which yields a new CF model, denoted as CF_Attention. Using real-world trajectory data, we design three experiments and select three representative CF models to validate the CF_Attention. The results indicate that the CF_Attention outperforms the other models in predicting the new follower's trajectory, which is not affected by the heterogeneous behavior of the new follower and the anticipation duration. Additionally, the CF_Attention is proven effective in capturing the speed-space relationship and the formation of oscillation. Finally, our transferability test suggests that the CF_Attention is promising for different locations and times without requiring retraining. The results of this study could advance the integration of the LC impact and CF behavior, and could be implemented into commercial traffic simulation programs to describe vehicle movements in traffic flow more accurately.

Variable speed limits (VSLs) are a common traffic control measure to resolve freeway jam waves. State-of-the-art model predictive control (MPC) approaches of VSLs are developed based on Eulerian Lighthill-Whitham and Richards (LWR) models, where the decision variables are flows between road segments. It is difficult to implement constraints on speeds that are necessary in typical real-world speed limit systems, because converting flow to speed results in nonlinear and non-convex optimization formulations. In this paper, we develop a new MPC of VSLs based on a discrete Lagrangian LWR model, in which the decision variables are average speeds of vehicle groups. This allows formulating speed constraints as control constraints rather than state constraints in the MPC problem. The optimization of vehicle groups speeds is formulated as a linear programming problem which can be solved efficiently. We further integrate the presented MPC to a hierarchical VSL control framework leveraging connected vehicles. The presented MPC decides the optimal target speed of each vehicle group led by a connected automated vehicle (CAV) at the upper macroscopic level with a prediction horizon of 20 min. At the lower microscopic level, CAVs randomly distributed in mixed traffic are regarded as actuators of the upper layer. Microscopic CAV accelerations are optimized in a short horizon of the order 5–10 s so that the human-driven vehicles following them reach the target speed from the upper layer in an efficient and smooth manner. The presented MPC and the hierarchical control approach are tested in microscopic simulation environments. Simulation results show that (i) the presented MPC resolves freeway jam waves efficiently with reasonable safety constraints implemented, and (ii) the presented hierarchical control approach can effectively resolve jam waves in a single-lane freeway, even though the penetration rate of CAVs is as low as 5%.