Tuning of phosphor luminescence properties, including the emission energy/intensity and thermal stability, is an important way to develop superior luminescent materials for diverse applications. In this work, we discuss the effect of band gap engineering and energy transfer on the luminescence properties of Ce3+ or Pr3+ doped (Y,Gd)AGG systems, and analyze the underlying reasons for their different phenomena. By using VUV-UV excitation spectra and constructing VRBE schemes, the changes of host band structure, 5d excited level energies and emission thermal stability of Ce3+ and Pr3+ with the incorporation of Gd3+ ions were studied. In addition, the energy transfer dynamics was also investigated in terms of the luminescence decay curves. This work demonstrates a way to tune phosphor luminescence properties by combining band gap engineering and energy transfer tailoring and provides an inspiring discussion on the different results of Gd3+ doping on the Ce3+ and Pr3+ emissions.@en

RbBaPO4:Eu2+ phosphors have been prepared by a high-temperature solid-state reaction method, and the structure was determined by Rietveld refinement based on powder X-ray diffraction (P-XRD) data. Their VUV-UV-vis photoluminescence properties are systematically investigated with three objectives: (1) based on low-temperature spectra, we clarify the site occupancies of Eu2+, and demonstrate that the doublet emission bands at ∼406 and ∼431 nm originate from Eu2+ in Ba2+ [Eu2+(I)] and Rb+ [Eu2+(II)] sites, respectively; (2) an electron-vibrational interaction (EVI) analysis is conducted to estimate the Huang-Rhys factors, the zero-phonon lines (ZPLs) and the Stokes shifts of Eu2+ in Rb+ and Ba2+ sites; (3) the studies on luminescence decay of Eu2+(I) reveal that dipole-dipole interaction is mainly responsible for the energy transfer from Eu2+(I) to Eu2+(II), and the energy migration between Eu2+(I) is weak. Finally, the X-ray excited luminescence (XEL) spectrum indicates that the light yield of the sample RbBa0.995Eu0.005PO4 is ∼17700 ph/MeV, showing its potential application in X-ray detecting. @en

Ce3+-doped LiSr4(BO3)3 phosphors have been prepared by a high-temperature solid-state reaction method, and structural refinement of the host compound has been performed. The excitation and emission spectra in the vacuum ultraviolet-ultraviolet-visible range at cryogenic temperatures reveal that Ce3+ ions preferentially occupy eight-coordinated Sr2+ sites in LiSr4(BO3)3. Such experimental attribution is well corroborated by the calculated 4f-5d transition energies and defect formation energies of Ce3+ ions at two distinct Sr2+ sites in the first-principles framework. In addition, the doping concentration-dependent luminescence and the temperature-dependent luminescence are systematically investigated by luminescence intensity and lifetime measurements, respectively. This shows that concentration quenching does not occur in the investigated doping range, but inhomogeneous broadening exists in the concentrated samples. With the estimated thermal quenching activation energy, the discussions on the thermal quenching mechanisms suggest that the thermal-ionization process of the 5d electron is a dominant channel for thermal quenching of Ce3+ luminescence, despite the fact that thermally activated concentration quenching cannot be excluded for the highly doped samples. Finally, the X-ray excited luminescence measurement demonstrates the promising applications of the phosphors in X-ray detection. @en

Luminescent materials with controllable colour evolution features are demanded for the development of multi-level anti-counterfeiting technologies. Here we report the structural and luminescence properties of CaMgSi2O6:Ln (Ln = Eu2+, Eu3+, Eu2+/3+) samples in detail and reveal their excitation-wavelength/temperature driven colour evolution characteristics. By tuning either the excitation-wavelength (276, 304, 343, 394 nm) or temperature (in the 330-505 K range), the designed samples with co-existing Eu2+/Eu3+ions can achieve diverse and controllable colour evolution from red, to pink, purple and blue. This shows their potential application in anti-counterfeiting with the help of sophisticated pattern design. In addition, the underlying mechanism of the Stokes shift of the Eu2+emission and valence stability of both Eu2+/Eu3+ions in CaMgSi2O6are also studied in depth. These results are valuable for designing colour-controllable luminescent materials based on the co-existence of the Eu2+/Eu3+ions for anti-counterfeiting applications.@en