There are currently a number of major drawbacks to using a colonoscope that limit its efficacy. One solution to this may be to use a warm liquid to distend the colon during inspection. Another is to replace the colonoscope with a small mobile robot-a solution many believe is the future of gastrointestinal intervention. This paper presents RollerBall, an intraluminal robot that uses wheeled-locomotion to traverse the length of a fluid-filled colon. The device provides a central, stable platform within the lumen for the use of diagnostic and therapeutic tools. The concept is described in detail and the feasibility demonstrated in a series of tests in a synthetic colon.@en

Goal: Tread patterns are widely used to increase traction on different substrates, with the tread scale, geometry and material being tailored to the application. This work explores the efficacy of using macro-scale tread patterns for a medical application involving a colon substrate - renowned for its low friction characteristics. Methods: Current literature was first summarized before an experimental approach was used, based on a custom test rig with ex vivo porcine colon, to assess different macro-scale tread patterns. Performance was based on increasing traction while avoiding significant trauma. Repeated testing (n = 16) was used to obtain robust results. Results: A macro-scale tread pattern can increase the traction coefficient significantly, with a static traction coefficient of 0.74 ± 0.22 and a dynamic traction coefficient of 0.35 ± 0.04 compared to a smooth (on the macro-scale) Control (0.132 ± 0.055 and 0.054 ± 0.015, respectively). Decreasing the scale and spacing between the tread features reduced apparent trauma but also reduced the traction coefficient. Conclusion: Significant traction can be achieved on colon tissue using a macro-scale tread but a compromise between traction (large feature sizes) and trauma (small feature sizes) may have to be made. Significance: This work provides greater insight into the complex frictional mechanisms of the intestine and gives suggestions for developing functional tread surfaces for a wide range of clinical applications. @en

Compliant actuation methods are popular in robotics applications where interaction with complex and unpredictable environments and objects is required. There are a number of ways of achieving this, but one common method is Series Elastic Actuation (SEA). In a recent version of their Unified Snake robot, Choset et al. incorporated a Series Elastic Element (SEE) in the form of a rubber torsional spring. This paper explores the possibility of using multi-material 3D printing to produce similar SEEs. This approach would facilitate the fabrication and testing of different springs and minimize the assembly required. This approach is evaluated by characterizing the behavior of two configurations of SEE, 3d printed with different dimensions. The springs exhibit predictable viscoelastic behavior that is well described by a five element Wiechert model. We find that individual springs behave predictably and that multiple copies of the same spring design exhibit good consistency.@en