A major contributor to GHG emissions is the transportation sector, particularly pavement transport. The limited understanding of tire-pavement interactions leads to inaccurate predictions of these emissions, particularly from rolling resistance (RR). Traditional methods for predicting RR are constrained by their limited applicability and inability to account for the complex dynamics of tire-pavement interactions, resulting in poor prediction accuracy. These limitations make it challenging for policymakers to make proper decisions, as existing methods are manual and labour-intensive. This study aims to develop an automated system to capture tire-pavement interaction data using the Laser Crack Measurement System (LCMS). To the best of the authors' knowledge, no robust technique currently exists for automatically calculating tire penetration-related information from LCMS data to predict RR. Therefore, this research explores machine learning (ML)-based models to reduce uncertainties in existing approaches and enhance RR predictions using automated LCMS data. It examines the relationships between RR, tire penetration volume, and the characteristics of the Dutch pavement network, comparing the results with those of commonly used RR prediction models. The study introduces an automatic tire penetration calculation approach using LCMS data to assess the impact of tire penetration volume and depth on RR in relation to surface properties. The findings reveal that traditional empirical models show poor correlations between RR and texture indicators, whereas ML-based models significantly improve the accuracy of RR predictions. These results could inform the development of strategies to reduce GHG emissions from pavement transport, supporting global efforts to combat climate change and achieve the goals of the Paris Agreement.

Inconsistencies between performance data from laboratory-prepared and field samples have been widely reported. These inconsistencies often result in inaccurate condition prediction, which leads to inefficient maintenance planning. Traditional pavement management systems (PMS) do not have the appropriate means (e.g., mechanistic solutions, extensive data handling facilities, etc.) to consider these data inconsistencies. With the growing demand for sustainable materials, there is a need for more self-learning systems that could quickly transfer laboratory-based information to field-based information inside the PMS. The article aims to present a future-ready machine learning-based framework for analyzing the differences between laboratory and field-prepared samples. Developed on the basis of data obtained from field and laboratory data, the gradient-boosting decision trees-based framework was able to establish a good relationship between laboratory performance and field performance (R2test > 80 for all models). At the same time, the framework could also show more complex relationships that are often not considered in practice.

The lifetime of Porous Asphalt (PA) can be extended by doing preventive maintenance by means of rejuvenation products. The Dutch Road Authority for highways, Rijkswaterstaat (RWS), has constructed several test sections and monitors the development of stone loss by using the DOS/LCMS system. The monitoring runs now for 9 years and shows that in sections treated with rejuvenation products the development of raveling of PA16 is delayed for at least 3 years compared to non-treated sections. For 2-layered PA, 2LPA8 no raveling has been seen, thus no delay has been (yet) observed. Samples have been retrieved from drilled cores, which have been investigated by Rotating Surface Abrasion Test for stone loss, aging and erosion of the mortar. The results of the research are discussed. It is concluded that the method of investigation by taking cores arbitrarily on project level poorly reflect the average stone loss in a 100 m section.