Since the development of the first theories to predict the buckling induced by axial compression in shells sensitive to imperfections, a significant discrepancy between theoretical and experimental results has been observed. Donnell and Koiter are among the first authors demonstrating, for these structures, the relevant influence of the geometrical imperfections on the reduction of the buckling load. Currently, the preliminary design of imperfections sensitive shell structures used in space applications is carried out according to the NASA SP-8007guideline. However, several studies have proven that this guideline leads to over-conservative design configurations when considering the geometrical and material imperfections existing in real cones. Since the pioneer work of Arbocz, alternative methods have been investigated to overcome this issue. Among the different approaches, in this paper, the Single Perturbation Load Approach (SPLA), originally developed byHühne as a deterministic way to calculate the knock-down factor of imperfection sensitive shells, is further studied. Indeed, a numerical investigation about the application of the SPLA to the simulation of the mechanical behavior of imperfection sensitive composite conical structures under axial compression is presented. This study is related to part of the work performed in the frame of the European Union (EU) project DESICOS.@en

Buckling is a critical failure phenomenon for structures, and represents a threat for thin shells subjected to compressive forces. The global buckling load, for a conical structure, depends on the geometry and material properties of the shell, on the stacking sequence, on the type of applied load and on the initial geometric imperfections. Geometric imperfections, occurring inevitably during manufacturing and assembly of thin-walled composite structures, produce a reduction in the carrying load capability with respect to the design value. This is the reason why investigating these defects is of major concern in order to avoid over-conservative design structures. In this paper, the buckling behavior a conical structure with 45° semi-vertical angle is numerically investigated. The initial imperfections are taken into account by using different strategies. At first, the Single Perturbation Load Approach (SPLA), which accounts for defects in the form of a lateral load, normal to the surface, has been adopted. Then, the actual measured defects have been applied to the structure by using the Real Measured Mid-Surface Imperfections (MSI) approach. Investigations on cylindrical shells using the first strategy have already shown the occurrence of a particular phenomenon called “local snap-through”, which represents a preliminary loss of stiffness. In order to better understand this phenomenon for conical shells, both the aforementioned techniques have been used to provide an exhaustive overview of the imperfections sensitiveness in conical composite shells. This study is related to part of the work performed in the frame of the European Union (EU) project DESICOS.@en