This paper presents the collaborative model-based design of a business jet family. In family design, a trade-off is made between aircraft performance, reducing fuel burn, and commonality, reducing manufacturing costs. The family is designed using Model-Based Systems Engineering (MBSE) methods developed in the AGILE 4.0 project. The EC-funded AGILE 4.0 project extends the scope of the preliminary aircraft design process to also include systems engineering phases and new design domains like manufacturing, maintenance, and certification. Stakeholders, needs, requirements, and architecture models of the business jet family are presented. Then, the collaborative Multidisciplinary Design Analysis and Optimization (MDAO) capabilities are used to integrate various aircraft design disciplines, including overall aircraft design, onboard systems design, wing structural sizing, tailplane sizing, mission analysis, and cost estimation. Decisions regarding the degree of commonality are implemented by optionally fixing the design of a shared component when sizing an aircraft.@en

A retrofit analysis on a 90 passengers regional jet aircraft is performed through a multidisciplinary collaborative aircraft design and optimization highlighting the impact on costs and performance. Two different activities are accounted for selecting the best aircraft retrofit solution: a re-engining operation that allows to substitute a conventional power-plant platform with advanced geared turbofan and an on-board-systems architecture modernization, considering different levels of electrification. Besides the variables that are directly dependent from these activities, also scenario variables are considered during the optimization such as the fuel price, the fleet size and the years of utilization of the upgraded systems. The optimization is led by impacts of the retrofitting process on emissions, capital costs and saving costs, computed at industrial level. Overall aircraft design competences (aerodynamics, masses, performance, noise, and emissions) have been computed increasing the level of fidelity and reliability. The whole process is implemented in the framework of the AGILE 4.0 research project in a collaborative remote multidisciplinary approach. Results show that the engine retrofitting can be a profitable solution for both manufacturers and airliners. Conversely, the on-board-system electrification seems to be not convenient in a retrofitting process due to the high capital costs. Depending on the operative scenario, involved stakeholders can properly orient their decision on a retrofitting strategy.@en