Multiple samples are required to monitor and optimize the quality and reliability of quantitative measurements of stimulated emission depletion (STED) and confocal microscopes. Here, we present a single sample to calibrate these microscopes, align their laser beams and measure their point spread function (PSF) in 3D. The sample is composed of a refractive index matched colloidal crystal of silica beads with fluorescent and gold cores. The microscopes can be calibrated in three dimensions using the periodicity of the crystal; the alignment of the laser beams can be checked using the reflection of the gold cores; and the PSF can be measured at multiple positions and depths using the fluorescent cores. It is demonstrated how this sample can be used to visualize and improve the quality of STED and confocal microscopy images. The sample is adjustable to meet the requirements of different NA objectives and microscopy techniques and additionally can be used to evaluate refractive index mismatches as a function of depth quantitatively.@en

We present the synthesis of monodisperse cone-shaped silica colloids and their fluorescent labeling. Rod-like silica colloids prepared by ammonia-catalyzed hydrolysis and condensation of tetraethyl orthosilicate in water droplets containing polyvinylpyrrolidone cross-linked by citrate ions in pentanol were found to transform into cone-shaped particles upon mild etching by NaOH in water. The diameter and length of the resulting particles were determined by those of the initial rod-like silica colloids. The mechanism responsible for the cone-shape involves silica etching taking place with a varying rate along the length of the particle. Our experiments thus also lead to new insights into the variation of the local particle structure and composition. These are found to vary gradually along the length of the rod, as a result of the way the rod grows out of a water droplet that keeps itself attached to the flat end of the bullet-shaped particles. Subtle differences in composition and structure could also be resolved by high-resolution stimulated emission depletion confocal microscopy on fluorescently labeled particles. The incorporation of a fluorescent dye chemically attached to an amine-based silane coupling agent resulted in a distribution of fluorophores mainly on the outside of the rod-shaped particles. In contrast, incorporation of the silane coupling agent alone resulted in a homogeneous distribution. Additionally, we show that etching rods, where a silane coupling agent alone was incorporated and subsequently coupled to a fluorescent dye, resulted in fluorescent silica cones, the orientation of which can be discerned using super-resolution confocal microscopy.@en

We present experimental and theoretical results on suspensions of silica rods in DMSO-water, subjected to an applied electric field. The experimental results indicate that, if the electrode used for generating the electric field is in direct contact with the suspension, a fraction of the rods close to the electrode surface does not stand parallel to the field but instead lies flat on the electrode when the field is switched on. To explain these results theoretically, we modify the coupled dipole method to include “image dipoles”, and find that a rod close to the electrode experiences not only the expected global potential energy minimum at an orientation parallel to the electric field, but also a local minimum several times the thermal energy in depth for orientations parallel to the electrode surface. Additionally, we indicate how the magnitude of the potential energy depends on the electric field strength and include results not only for negatively polarizable (which correspond to the aforementioned experimental system), but also for positively polarizable rods.@en

Concentration gradients play a critical role in embryogenesis, bacterial locomotion, as well as the motility of active particles. Particles develop concentration profiles around them by dissolution, adsorption, or the reactivity of surface species. These gradients change the surface energy of the particles, driving both their self-propulsion and governing their interactions. Here, we uncover a regime in which solute gradients mediate interactions between slowly dissolving droplets without causing autophoresis. This decoupling allows us to directly measure the steady-state, repulsive force, which scales with interparticle distance as F∼1/r2. Our results show that the dissolution process is diffusion rather than reaction rate limited, and the theoretical model captures the dependence of the interactions on droplet size and solute concentration, using a single fit parameter, l=16±3nm, which corresponds to the length scale of a swollen micelle. Our results shed light on the out-of-equilibrium behavior of particles with surface reactivity.@en

Cation exchange is a very powerful method for creating heterogeneous nanocrystals (NCs), such as core‐shell or rod‐tip nanostructures. Here we present an overview of the experimental and simulation efforts made to elucidate the atomic mechanism underlying cation exchange in PbSe/CdSe nanocrystals.@en

Confocal microscopy is widely used for three-dimensional (3D) sample reconstructions. Arguably, the most significant challenge in such reconstructions is posed by the resolution along the optical axis being significantly lower than in the lateral directions. In addition, the imaging rate is lower along the optical axis in most confocal architectures, prohibiting reliable 3D reconstruction of dynamic samples. Here, we demonstrate a very simple, cheap, and generic method of multiangle microscopy, allowing high-resolution high-rate confocal slice collection to be carried out with capillary-contained colloidal samples in a wide range of slice orientations. This method, realizable with any common confocal architecture and recently implemented with macroscopic specimens enclosed in rotatable cylindrical capillaries, allows 3D reconstructions of colloidal structures to be verified by direct experiments and provides a solid testing ground for complex reconstruction algorithms. In this paper, we focus on the implementation of this method for dense nonrotatable colloidal samples, contained in complex-shaped capillaries. Additionally, we discuss strategies to minimize potential pitfalls of this method, such as the artificial appearance of chain-like particle structures.@en

We describe a facile method to synthesize sterically stabilized monodisperse fluorescent poly(methyl methacrylate) (PMMA) colloids in the polar solvent mixture water/methanol with either a core-shell or a homogeneously cross-linked structure by dispersion polymerization. The particles were sterically stabilized by the polymer poly(vinylpyrrolidone) (PVP). The morphology of the particles was controlled by varying the moment at which the gradual addition of cross-linker and dye was started. The absence of these extra agents at a time when the particle nuclei formed reduced the negative effects on this important process to a minimum and produced a core-shell structure, whereas an essentially homogeneously cross-linked fluorescent polymer colloid structure could be obtained by reducing the starting time of the addition of dye and cross-linker to zero. Three different dyes were chemically incorporated into the polymer network. Such dyes are important for the use of the particles in confocal scanning laser microscopy studies aimed at characterizing concentrated dispersions quantitatively in real space. A series of PMMA particles with different sizes were obtained through the variation of the weight ratio of solvents and the content of cross-linker. Furthermore, the swelling properties of the cross-linked PMMA particles in a good solvent (tetrahydrofuran) were investigated. The particles were stable in polar solvents (water and formamide) but could also successfully be transferred to apolar solvents such as decahydronaphthalene (decalin). The PVP stabilizer also allowed the particles to be permanently bonded in flexible strings by the application of an external electric field.@en