To extract raw materials responsibly and sustainably, the minerals industry has to continuously optimise the mine-to-metal process and requires an entirely different valuation model. Currently, most operational decisions (e.g., ore-waste boundaries, short-term scheduling, blending policies, dispatch decisions) are evaluated using a revenue-based model. Such a model derives the value of the material from its estimated metal content (grade ⇥ tonnage). However, metallurgical attributes which largely define the processing costs (revenue losses) are left out of the equation since they are either missing or unreliable. In a future optimisation step, it should be possible to offset the anticipated revenue against an aggregated metallurgical cost based on, for example, energy consumption, throughput, recovery and reagent consumption. This drives the need for an improved method to describe the to-be-processed material, which determines the influence of geological behaviour (the material type) on the processing performance (associated with the costs)....@en

Geochemical and mineralogical datasets from Tropicana Gold Mine, Australia, have been used to define Au-mineralised fingerprints. VNIR-SWIR spectral data were represented by four normalised wavelength regions and were clustered to form spectral classes. Sequentially, these spectral class proportions within a block and co-located pXRF data were clustered to discriminate material types (fingerprints). The hardness of each type was further explored using collocated BWi, Axb, Equotip rebound hardness and penetration rate datasets, but also by considering spatial contextual relationships and the within material type variability. The Tropicana orebody example gave a good illustration of how a phengitic-epidote K-feldspar rich domain (schistosity and softer, ∼15–18 kWh/t) separated from a harder (>20 kWh/t), shorter wavelength phengitic plagioclase-rich feldspar dominated domain. Exploring the within material type differences using the white mica composition (wAlOH) and a new w605 spectral feature demonstrated how the effects of shearing were captured within material types. Such findings will ultimately improve the understanding of the constitutive material hardness and have significance for process optimisation and blending strategy design.

@en

Multi-element (ME) datasets provide comprehensive geochemical signatures of an orebody and are commonly used to gain insight into the mineralogy, lithology, alteration patterns and to identify target-pathfinders. However, little effort is made in using these data to explain comminution or recovery characteristics. This paper describes an agglomerative hierarchical clustering approach applied to ME data from the Tropicana Gold Mine, Australia, and investigates the relationship between the resultant classes and run-of-mine comminution and recovery parameters. First, it is demonstrated how an industry scale ME dataset is prepared for clustering. The preparation consists of verifying the absence of interlaboratory and intralaboratory bias between measurements, centred log-ratio transformation (clr), normalisation and principal component analysis (PCA). Afterwards, the first case study indicate that the clustering separation is primarily driven by geochemical differences caused by major rock-forming mineral signatures (felsic vs mafic, alteration vs no alteration, chert or quartz lithologies, unmineralised vs mineralised material). This case study separates the ME dataset into five unmineralised and two Au-mineralised material classes. The second case study continues with the two identified mineralised material classes and further separates these samples into five new classes. These classes are explored geochemically and by using the spatial context (within domains) better matched with metallurgical test results. It is found that domain-related material class proportions assist in interpreting different processing proxies such as the Equotip hardness (Leeb), Bond Work index (BWi), Axb, and processing recovery and reagent consumption. Knowledge of the processing parameters per domain and class composition can be used to infer such characteristics in the absence of standard metallurgical tests. This new approach of gaining insights into comminution and recovery parameters through geochemical analysis demonstrates the benefit of the conceptualised material fingerprinting concept.

@en

The results of dig limit delineation in open pit mining are never truly optimized due to gaps in the underlying data, such as insufficient sampling. Aside from the data uncertainty, there is also an influence on the final dig limit by either humans or by the heuristic character of an optimization method like simulated annealing. Several dig limit optimizers have been published, which can replace the manual dig-limits designing process. However, these dig limit designs are generally not adapted to account for this heuristic character. In this paper we present a stochastic analysis tool that can be used with the results of heuristic dig-limit optimization to increase confidence in the obtained results. First, an enhanced simulated annealing algorithm for dig limit optimization is presented. Then, this algorithm is tested on ten different blasts at the Marigold mine, Nevada, USA, as a case study. Finally, the results are analysed with a destination-based ensemble probability map and an analysis conducted of the final solution data distribution. The generated dig-limit designs of the algorithm include high revenue areas that are excluded in comparable manual designs and show improved objective and revenue values. The analysis tool provides block destination probabilities and box plots with the distribution of opportunity value for the dig limit. Furthermore, with the analysis tool, it is possible to make well-informed design decisions in areas of uncertainty. @en

Geochemical and mineralogical datasets from Tropicana Gold Mine, Australia, have been used to define ore fingerprints. VNIR/SWIR spectral data were represented by four normalised wavelength regions and were clustered to form spectral classes. Sequentially, these spectral class proportions within a block and collocated XRF data were clustered to from material types (fingerprints). The material types were related to an Equotip-BWi correlation. These correlations can be used to extrapolate a hardness signature and generate a BWi proxy for different blocks. The combined fingerprints and BWi proxy can assist as a tool for enhancing the prediction of comminution behaviour. They can explain specific domain-related hardness variations. For example, one material type could be separated into a softer (~15-18 kWh/t), and harder (>20 kWh/t) material blend. This was accomplished using the commonly overlooked VNIR region at 605 nm. This outcome has significance for blending strategies.@en

Material attributes (e.g., chemical composition, mineralogy, texture) are identified as the causative source of variations in the behaviour of mineral processing. That makes them suitable to act as key characteristics to characterise and classify material. Therefore, vast quantities of collected data describing material attributes could help to forecast the behaviour of mineral processing. This paper proposes a conceptual framework that creates a data-driven link between ore and the processing behaviour through the creation of material “fingerprints”. A fingerprint is a machine learning-based classification of measured material attributes compared to the range of attributes found within the mine’s mineral reserves. The outcome of the classification acts as a label for a machine learning model and contains relevant information, which may identify the root cause of measured differences in processing behaviour. Therefore, this class label can forecast the associated behaviour of mineral processing. Furthermore, insight is given into the confidence of available data originating from different analytical techniques. Taken together, this enhances the understanding of how differences in geology impact metallurgical plant performance. Targeted measurements at low-confidence unit processes and for specific attributes would upgrade the confidence in fingerprints and capabilities to predict plant performance.

@en

Metallurgical attributes are often omitted from the mine to metal valuation models since they are either absent or unreliable. However, recent developments in sensor technology indicate the potential to collect information on metallurgical properties directly or by measurement of proxies. Integrating this information back into the resource model would provide the necessary means to move towards a more comprehensive and reliable evaluation model. To obtain truly optimized mining decisions it is necessary to consider the metallurgical attributes since they are indicated as root cause of changing plant performance. Therefore, a better metallurgical characterization of the plant feed over time is required, which allows for a more optimal selection of process control settings. Different material types have varying effects on machine performance in the comminution circuit. This makes it possible to refer a performance change as a response to different geological attributes. Hence, the corresponding geological machine behaviour can be controlled by defining effects of behavioural geology. This paper introduces a framework containing data fusion of sensor responses which resemble geological attributes and subsequent multivariate time series machine behaviour characterization for improved process control in the comminution circuit. The conceptual framework’s approach is that process control in future will be supervised by profound knowledge from sensor data indicating geological behaviour. The use of multivariate time series deep learning is proposed to create innovative process control. This innovative control is then a response to a combination of advanced sensor data (XRF, LIBS, FTIR, etc.) with more traditional sensor data (throughput, density, etc.). These advanced sensors provide more knowledge about material specific properties in the form of discoverable events. This new knowledge is important in the vision of behavioural geology, to better understand the influence of geological behaviour on machine performance.@en