The present study developed a sizing analysis system for head-related product designs based on the Civilian American and European Surface Anthropometry Resource (CAESAR) database of North Americans. A total of 2299 heads in the CAESAR database were manually edited and 26 anthropometric landmarks were marked on the edited 3D heads to measure 30 anthropometric dimensions related to head-related product designs. The 3D anthropometric sizing analysis system (3D-ASAS) developed in the study provides analysis functions of a sizing system and representative face models by considering a target product, a target population, the number of size categories, and key anthropometric dimensions based on the CAESAR head measurements. Further research to reduce the efforts of manual editing and landmarking of 3D body scan data is discussed for efficient application of the 3D-ASAS to the design process of various wearable products. ... Read more

Detail anthropometric dimensions and a 3D shape of the outer-ear are applicable to design ear-related products such as an earphone. However, 3D scanning of the ear part is quite difficult due to a complex shape of the ear, also detailed ear dimensions which are needed to be measured for earphone design were not identified in previous studies. This study collected 3D scan images of the whole outer-ear from 100 Korean participants (50 females and 50 males) aged 20 to 59, then measured their detailed ear dimensions for earphone design. The pinna part was directly 3D scanned; and complex shape of the concha and acoustic canal parts were cast by applying an ear casting tool, then the cast was scanned in 3D. 13 ear dimensions were measured by applying an ear measurement system coded using Matlab. Both 3D ear scans and ear measurements were applied to design some earphone parts (earphone-head, ear-band, ear-tip) in this study. ... Read more