This study aims to understand the effects and mechanisms of length, diameter, and functional group of carbon nanotubes (CNTs) on rheological behaviors of cementitious composites. The experimental results show that the addition of CNTs decreases the flow index and increases the critical shear rate of cementitious composites. CNTs with a sub-micrometer length and small diameter endow cementitious composites with high yield stresses and minimum viscosities. Influenced by the high water absorption of hydroxylic groups, the minimum viscosity of cementitious composites with hydroxyl functionalized CNTs is larger than that of composites with pristine carbon nanotubes (p-CNTs). By contrast, the yield stress and minimum viscosity of cementitious composites with carboxyl functionalized CNTs are smaller than that of cementitious composites with p-CNTs at most contents due to the high dispersion induced by carboxyl groups. The effect mechanisms of CNTs on rheological behaviors can be attributed to adsorption effect and entanglement effect, which are closely related to length, diameter and functionalization groups of CNTs. The established minimum viscosity prediction model considering the influence of CNT physicochemical features can provide guidance for regulating the workability and hardened performance of CNTs modified cementitious composites.

This study investigates the effects of nanofillers on the interfacial transition zone (ITZ) between aggregate and cement paste by using nanoindentation and statistical nanoindentation techniques. Moreover, the underlying mechanisms are revealed through micromechanical modeling. The nanoindentation results indicate that incorporating nanofillers increases the degree of hydration in the ITZ, reduces the content of micropores and low-density calcium silicate hydrate (LD C–S–H), and increases the content of high-density C–S–H (HD C–S–H) and ultrahigh-density C–S–H (UHD C–S–H). In particular, a new phase, namely nano-core-induced low-density C–S–H (NCILD C–S–H), with a superior hardness of 2.50 GPa and an indentation modulus similar to those of HD C–S–H or UHD C–S–H was identified in this study. The modeling results revealed that the presence of nanofillers increased the packing density of LD C–S–H and significantly enhanced the interaction (adhesion and friction) among the basic building blocks of C–S–H gels owing to the formation of nano-core–shell elements, thereby facilitating the formation of NCILD C–S–H and further improving the performance of the ITZ. This study provides insight into the effects of nanofillers on the ITZ in concrete at the nanoscale.

This paper aims to investigate the effect of nano/micro-structures on anti-impact property of nano-boron nitride (nano-BN) filled cementitious composites, and to predict the dynamic mechanical behavior of the composites by introducing a damage constitutive model. It is found that nano-BN can fundamentally modify the micro- and even nano-structures of cementitious composites, and therefore greatly improve the anti-impact property of the composites at the macro level. Specifically, nano-BN refines the pore structure (especially at nano-scale) of composite matrix and increases its compactness. Furthermore, by enhancing polymerization state of silicate tetrahedron in C-S-H gel, nano-BN improves the micromechanical properties of hydration products at different micro-zones. Consequently, dynamic mechanical property of cementitious composites at macro-level is enhanced, and the energy absorption capacity is improved. In addition, dynamic damage model indicates that nano-BN inhibits the damage of cementitious composites, but its inhibition form changes with the strain rate.