This work investigates an integrated analysis of in-situ optical data and time-frequency information from electrochemical potential noise (EPN) data to study the effectiveness and durability of an anodic and cathodic corrosion inhibitor. Two different corrosion inhibiting species, cerium(III) (Ce(III)) and phytic acid (PHA), are tested on aluminum alloy AA2024-T3. Corrosion of AA2024-T3 serves as a negative reference. Time-frequency analysis of EPN data provides a direct insight in the kinetics of the electrochemical processes related to different types of corrosion and/or inhibitor activity over time. The simultaneous, in-situ optical technique allows visualizing and quantifying the surface changes associated with the electrochemical signals. Both Ce(III) and PHA were not capable to inhibit corrosion to a large extent, as re-immersion led to electrochemical (corrosion) activity for both inhibitors. Time-variant changes between corrosion, inhibitor activity, inhibited state and re-activation can effectively be discriminated from each other.

A hyphenated optical-electrochemical technique and image analysis protocol is used to quantify global and local (intermetallic) corrosion process and kinetics. Our findings reveal an early stage (< 60 s) composition-dependent hierarchical local activation of all IMs that can be attributed to IM dealloying. This is followed by local trenching initiated at matrix locations adjacent to regions of the IMs previously dealloyed, which in turn develops into concentric trenching around the IMs. These stages have quantifiable activation times and kinetics. While dealloying kinetics are found to be strongly dependent on IM composition and slightly dependent on IM size in the case of the S-phases, trenching kinetics are IM composition and size independent.