Tandem-L is a highly innovative SAR satellite mission for the global observation of dynamic processes on the Earth's surface with hitherto unknown quality and resolution. Thanks to its novel imaging techniques and its unprecedented acquisition capacity, Tandem-L will deliver urgently needed information for the solution of pressing scientific questions in the areas of the biosphere, geosphere, cryosphere and hydrosphere. The feasibility of Tandem-L has been analyzed and confirmed in the scope of a phase A study, which has been conducted in close cooperation between the German Aerospace Center (DLR) and the German space industry. This paper provides an overview of the Tandem-L mission concept and summarizes the actual development status.

TanDEM-X (TerraSAR-X add-on for Digital Elevation Measurements) is an innovative formation-flying radar mission that opens a new era in spaceborne radar remote sensing. The primary objective is the acquisition of a global digital elevation model (DEM) with unprecedented accuracy (12 m horizontal resolution and 2 m relative height accuracy). This goal is achieved by extending the TerraSAR-X synthetic aperture radar (SAR) mission by a second, TerraSAR-X like satellite (TDX) flying in close formation with TerraSAR-X (TSX). Both satellites form together a large single-pass SAR interferometer with the opportunity for flexible baseline selection. This enables the acquisition of highly accurate cross-track interferograms without the inherent accuracy limitations imposed by repeat-pass interferometry due to temporal decorrelation and atmospheric disturbances. Besides the primary goal of the mission, several secondary mission objectives based on along-track interferometry as well as new bistatic and multistatic SAR techniques have been defined, representing an important and innovative asset of the TanDEM-X mission. TanDEM-X is implemented in the framework of a public-private partnership between the German Aerospace Center (DLR) and EADS Astrium GmbH. The TanDEM-X satellite was successfully launched in June 2010 and the mission started its operational data acquisition in December 2010. This paper provides an overview of the TanDEM-X mission and summarizes its actual status and performance. Furthermore, results from several scientific radar experiments are presented that show the great potential of future formation-flying interferometric SAR missions to serve novel remote sensing applications.

TanDEM-X (TerraSAR-X Add-on for Digital Elevation Measurements) is a high-resolution interferometric mission with the main goal of providing a global and unprecedentedly accurate digital elevation model of the Earth surface by means of single-pass X-band synthetic aperture radar (SAR) interferometry. Despite its usual quasi-monostatic configuration, TanDEM-X is the first genuinely bistatic SAR system in space. During its monostatic commissioning phase, the system has been mainly operated in pursuit monostatic mode. However, some pioneering bistatic SAR experiments with both satellites commanded in nonnominal modes have been conducted with the main purpose of validating the performance of both space and ground segments in very demanding scenarios. In particular, this letter reports about the first bistatic acquisition and the first single-pass interferometric (mono-/bistatic) acquisition with TanDEM-X, addressing their innovative aspects and focusing on the analysis of the experimental results. Even in the absence of essential synchronization and calibration information, bistatic images and interferograms with similar quality to pursuit monostatic have been obtained.

This paper reports on several experiments performed with the TerraSAR-X (TSX) and the TanDEM-X (TDX) satellites. The experiments consist in the generation of improved image products by coherently combining the images acquired individually by both satellites, hence the name distributed imaging. In the literature it has already been suggested the use of two or more satellites in close formation not only to have interferometric capabilities, but also to improve the azimuthal or range resolutions by performing the acquisitions simultaneously (no temporal decorrelation). This idea can be carried out by acquiring different portions of the spectrum and adding them coherently afterwards. Another possibility is to synthesize quad-pol acquisitions using dual-pol ones, an idea already carried out with airborne systems. Such experiments have been performed with TSX and TDX and are described in this paper.