This paper discusses the numerical results for a consolidation test studied by using a hydromechanical model formulated within a numerical homogenization approach, the so-called finite element squared method, FE2. This model is characterized by two observation scales: at the microscopic scale, the microstructure of the material is described as an assembly of hyperelastic grains connected by cohesive interfaces that define a network of channels in which fluid can percolate. This microstructure, periodically distributed in the small-scale, identifies the Representative Elementary Volume of the material. At the macroscopic scale, the material is treated as a continuum and the corresponding constitutive equations are obtained by means of a numerical homogenization process on the microscopic problem. In this manner, the total stress of the mixture, the density of the mixture, the fluid mass flow and the fluid mass content can be computed. The objective of this work is to compare the numerical results with the analytical solution of a classical oedometric test using the poroelastic theory of Biot (1941) [1]. For this purpose, it is shown that the hydromechanical behavior obtained with the selected FE2 method is characterized by a classical Biot-like porous medium and the resulting macroscopic properties can be illustrated in light of the hydromechanical mechanisms at the microscopic scale.

Disposal of spent nuclear fuel and long lived radioactive waste in deep clay geological formations is one of the promising options worldwide. In this concept of the geological disposal system, the Boom Clay is considered as a potential host rock when designing a generic waste repository in the Netherlands. For design and evaluation of a repository for geologic disposal of nuclear wastes one of its principal concern is the thermal loading. High-level radioactive waste and spent fuel generate considerable amounts of heat. When those waste types are disposed in a geological repository the elevated thermal effect on the behaviour of soils surrounding nuclear waste disposal give rise to change in hydraulic and mechanical properties is a significant factor for repository design. Understanding these time-dependent phenomena processes in relation to both the effects of pore water dissipation and of the thermal expansion is essential for reliably assessing repository performance and evaluating the safety case. This paper presents some of the investigation on the thermal processes with emphasis on the coupled Thermo-Hydro- Mechanical (THM) processes for the disposal concept of a radioactive waste disposal facility, in Boom Clay at a depth of about 500m.