Water management in lowland areas usually aims to keep water tables within a narrow range to avoid flooding and drought conditions. A common water management target parameter is the depth of the canal water table below the surrounding soil surface. We demonstrated a method that rapidly determines canal water table depth (CWD) from airborne LiDAR data. The water table elevation was measured as the minimum value determined in a grid of 100 m x 100 m applied to a 1 m x 1 m digital terrain model (DTM), and the soil surface was calculated as the median value of values in each grid cell. Results for areas in eastern Sumatra and West Kalimantan, Indonesia, were validated against 145 field measurements at the time of LiDAR data collection. LiDAR-derived CWD was found to be accurate within 0.25 m and 0.5 m for 86% and 99% of field measurements, respectively, with an R ² value of 0.74. We demonstrated the method for CWD conditions in a drained peatland area in Central Kalimantan, where we found CWD in the dry season of 2011 to be generally below-1.5 and often below-2.5 m indicating severely overdrained conditions. We concluded that airborne LiDAR can provide an efficient and rapid mapping tool of CWD at the time of LiDAR data collection, which can be cost-effective especially where LiDAR data or derived DTMs are already available. The method can be applied to any LiDAR-based DTM that represents a flat landscape that has open water bodies.

No accurate global lowland digital terrain model (DTM) exists to date that allows reliable quantification of coastal lowland flood risk, currently and with sea-level rise. We created the first global coastal lowland DTM that is derived from satellite LiDAR data. The global LiDAR lowland DTM (GLL_DTM_v1) at 0.05-degree resolution (~5 × 5 km) is created from ICESat-2 data collected between 14 October 2018 and 13 May 2020. It is accurate within 0.5 m for 83.4% of land area below 10 m above mean sea level (+MSL), with a root-mean-square error (RMSE) value of 0.54 m, compared to three local area DTMs for three major lowland areas: the Everglades, the Netherlands, and the Mekong Delta. This accuracy is far higher than that of four existing global digital elevation models (GDEMs), which are derived from satellite radar data, namely, SRTM90, MERIT, CoastalDEM, and TanDEM-X, that we find to be accurate within 0.5 m for 21.1%, 12.9%, 18.3%, and 37.9% of land below 10 m +MSL, respectively, with corresponding RMSE values of 2.49 m, 1.88 m, 1.54 m, and 1.59 m. Globally, we find 3.23, 2.12, and 1.05 million km ² of land below 10, 5, and 2 m +MSL. The 0.93 million km ² of land below 2 m +MSL identified between 60N and 56S is three times the area indicated by SRTM90 that is currently the GDEM most used in flood risk assessments, confirming that studies to date are likely to have underestimated areas at risk of flooding. Moreover, the new dataset reveals extensive forested land areas below 2 m +MSL in Papua and the Amazon Delta that are largely undetected by existing GDEMs. We conclude that the recent availability of satellite LiDAR data presents a major and much-needed step forward for studies and policies requiring accurate elevation models. GLL_DTM_v1 is available in the public domain, and the resolution will be increased in later versions as more satellite LiDAR data become available.

Coastal lowland areas support much of the world population on only a small part of its terrestrial surface. Yet these areas face rapidly increasing land surface subsidence and flooding, and are most vulnerable to future sea level rise. The accurate and up to date digital terrain models (DTMs) that are required to predict and manage such risks are absent in many of the areas affected, especially in regions where populations are least developed economically and may be least resilient to such changes. Airborne LiDAR is widely seen as the most accurate data type for elevation mapping but can be prohibitively expensive, as are detailed field surveys across a broad geographic scale. We present an economical method that utilizes airborne LiDAR data along parallel flight lines ('strips') covering between 10% and 35% of the land depending on terrain characteristics, and manual interpolation. We present results for lowland areas in Central Kalimantan and East Sumatra (Indonesia), for which no accurate DTM currently exists. The study areas are covered with forest, plantations and agricultural land, on mineral soils and peatlands. The method is shown to yield DTM differences within 0.5 m, relative to full coverage LiDAR data, for 87.7-96.4% of the land surface in a range of conditions in 15 validation areas, and within 1.0 m for 99.3% of the area overall. After testing, the method was then applied to the entire eastern coastal zone of Sumatra, yielding a DTM at 100 m spatial resolution covering 7.1 Mha of lowland area from 1.45 Mha of effective LiDAR coverage. The DTM shows that 36.3%, or 2.6 Mha, of this area is below 2 m +MSL and, therefore, at risk of flooding in the near future as sea level rise continues. This DTM product is available for use in flood risk mapping, peatland mapping and other applications.