Ev
E.B. van Baasbank
info
Please Note
<p>This page displays the records of the person named above and is not linked to a unique person identifier. This record may need to be merged to a profile.</p>
2 records found
1
Estimating wind fields using drones in a network
Estimating hyperlocal wind fields with on-board sensors on quadcopters
Charting hyperlocal wind using a drone is a challenge of increased attention as it unlocks potential in a variety of fields. In context of the METeo Sensors In the Sky project, this study proposes a method to estimate the magnitude and direction of wind using a quadcopter in hover and cruise without a dedicated wind sensor. Only on-board sensors are used, with no knowledge of thrust and rpm. A deterministic method models drag experienced by the drone classically as a quadratic function of true airspeed, and estimates wind by deducting the estimated true airspeed with the GPS ground speed. Additionally, a particle filter is implemented and compared to the deterministic method. To validate the proposed methods, a series of verification flights is conducted in which the drone is flown straight into the wind, perpendicular to, and away from the wind. The results show that the proposed method can estimate wind for various ground speeds and altitudes. The root mean square error ranges between 0.3-2.0 m/s and 5-35 degrees in most scenarios with high true airspeeds. In most cases, the particle filter shows a slight improvement over the deterministic method, at the cost of reduced adaptivity to wind changes (gusts).
...
Charting hyperlocal wind using a drone is a challenge of increased attention as it unlocks potential in a variety of fields. In context of the METeo Sensors In the Sky project, this study proposes a method to estimate the magnitude and direction of wind using a quadcopter in hover and cruise without a dedicated wind sensor. Only on-board sensors are used, with no knowledge of thrust and rpm. A deterministic method models drag experienced by the drone classically as a quadratic function of true airspeed, and estimates wind by deducting the estimated true airspeed with the GPS ground speed. Additionally, a particle filter is implemented and compared to the deterministic method. To validate the proposed methods, a series of verification flights is conducted in which the drone is flown straight into the wind, perpendicular to, and away from the wind. The results show that the proposed method can estimate wind for various ground speeds and altitudes. The root mean square error ranges between 0.3-2.0 m/s and 5-35 degrees in most scenarios with high true airspeeds. In most cases, the particle filter shows a slight improvement over the deterministic method, at the cost of reduced adaptivity to wind changes (gusts).
Bachelor thesis
(2019)
-
E.B. van Baasbank, Edoardo Barbieri, João Bessa Da Cruz Pereira, Ioan Biraoanu-Aaei, B.J.V. Englebert, J.H. Farr, M.M. Kemmeren, A.P. Reijns, A. Schelfhout, D. Verkooij, C. de Wagter, Q. Ye, X. Li
In an effort to reduce the time, costs, and health hazards involved with the inspection of aircraft fuel tanks, Lockheed Martin has commissioned the design of an autonomous inspection drone for fuel tanks to DSE Group 05 at the Aerospace Engineering faculty, Delft University of Technology. This report entails the conceptual design process of the autonomous robotic tank inspection system - or ARTIS - that has been designed in this endeavor.
...
In an effort to reduce the time, costs, and health hazards involved with the inspection of aircraft fuel tanks, Lockheed Martin has commissioned the design of an autonomous inspection drone for fuel tanks to DSE Group 05 at the Aerospace Engineering faculty, Delft University of Technology. This report entails the conceptual design process of the autonomous robotic tank inspection system - or ARTIS - that has been designed in this endeavor.