As more and more people choose the airplane as a means of transportation, the aviation industry faces new challenges in order to fulfill the increasing demand, while decreasing the costs and emissions. In this report, the authors present a design of a narrow-body aircraft that is meant to provide a 30 % direct operating costs reduction, as well as a 20 % reduction in NOx and CO2 emissions while being ready for market introduction by 2030. Furthermore, the aircraft should provide a noise reduction of 10 % which translates to a reduction of 29 [EPNdB] and it should house 177 passengers.

This report is the final report in a series of four reports that deals with the design of an advanced regional aircraft. The first step in the design is to determine the overall configuration of the ARA. By identifying the feasible configurations based on a literature study and performing a trade-o_, the conventional low wing with GTF engines underneath the wings configuration is found to be the optimal configuration for the ARA. After selecting the aircraft configuration, the preliminary subsystem design is initiated. Class I and II weight estimations are performed and a MTOW of 34500kg is determined. The selected wing planform is a two-piece complex sweptback planform with a wing area of 105m2 and a wing span of 30.7m. The thrust will be provided by two PW1217G GTFs with a maximum thrust of 76kN each. For the fuselage design, several configuration options are analysed taking into account structural and aerodynamic considerations. A trade-o_ is performed and the 4 abreast configuration with cargo in the tail is found to be the best choice. The tricycle configuration is chosen for the landing gear. The main gear is positioned 17.1m from the nose, while the nose gear is positioned 3.6m from the nose. The control surfaces comprising ailerons, spoilerons, elevators and rudder, are sized for extreme load cases. For roll control at low speeds outboard ailerons are used and spoilerons are used for roll control at high speeds. The elevators are sized to meet take-o_ and trim requirements. The rudder is sized to counteract the yawing moment with one-engine inoperative. Furthermore, the high-lift devices are sized. It is found that in order to fulfill landing and take-o_ requirements double-slotted Fowler flaps are required...