Design of a Weather Balloon Alternative
F.A. Voetter (TU Delft - Aerospace Engineering)
M.C. Otte (TU Delft - Aerospace Engineering)
H. Van Lierde (TU Delft - Aerospace Engineering)
M.R. Schutte (TU Delft - Aerospace Engineering)
M.J. Wijkhuizen (TU Delft - Aerospace Engineering)
R.A. Milla-Koch (TU Delft - Aerospace Engineering)
R. van der Voort (TU Delft - Mechanical Engineering)
T. Laier (TU Delft - Aerospace Engineering)
V.R. Gottumukkala (TU Delft - Civil Engineering & Geosciences)
W.V. Cijsouw (TU Delft - Aerospace Engineering)
Paul Roling – Mentor (TU Delft - Air Transport & Operations)
S. Stroobants – Graduation committee member (TU Delft - Control & Simulation)
R.K. van der Zwaard – Graduation committee member (TU Delft - Space Systems Egineering)
P.M.A. de Jong – Coach
T. Mathijssen – Mentor
More Info
expand_more
Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.
Abstract
Weather balloons have been used for decades as a means of measuring atmospheric properties. Balloons are launched twice a day from almost 900 locations worldwide, carrying measurement instruments called radiosondes. Along with data from ground-based sensors, aircraft, and remote-sensing satellites, the collected meteorological data is fed into numerical weather forecasts and climate models. The weather balloons typically burst at altitudes of around 33 km, after which the radiosonde falls back with a parachute but without any control. This leads to large amounts of waste scattered over land and sea. While the balloon material itself is fully biodegradable, the loss of radiosondes and their associated electronics can be an environmental threat. Furthermore, the loss of the filling gases such as helium and hydrogen also poses a threat to the environment – helium is a non-renewable resource and hydrogen indirectly causes warming effects when released in the upper atmosphere. These factors present the need to develop sustainable and reusable alternatives to current weather balloons. In response to this pressing need, the BRAVO family of gliders has been developed, which is short for “Balloon-Released Aerial Vehicle for weather Observation”. This report provides a comprehensive overview of the design process of creating these gliders. It introduces the detailed final design and outlines the logistical and operational procedures associated with their usage. Furthermore, the report encompasses meticulous analyses of cost and market factors, technical risks, and sustainability considerations. To ensure reliability, the gliders undergo thorough verification and validation processes. Finally, the report concludes with gained insights, recommendations, and directions for future work.F