Enhancing colloid stability of polymer microspheres in water through SiO2 coating
Effects of coating cycles and surface coverage
Rens Kamphorst (TU Delft - Applied Sciences)
Pratyush Wanjari (Student TU Delft)
Saeed Saedy (TU Delft - Applied Sciences)
Julia F.K. van Dam (Student TU Delft)
Arjan Thijssen (TU Delft - Civil Engineering & Geosciences)
Philipp Brüner (ION-TOF, Munster)
Thomas Grehl (ION-TOF, Munster)
Gabrie M.H. Meesters (TU Delft - Applied Sciences)
J. Ruud van Ommen (TU Delft - Applied Sciences)
More Info
expand_more
Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.
Abstract
In this study, we investigated the wettability and agglomeration characteristics of polymer microspheres coated with low-temperature deposited SiO2 in a fluidized bed atomic layer deposition (ALD) setup. Surface characterization revealed the presence of a significant amount of deposited Si-OH groups within the first cycles. A drastic decrease in agglomerate size, water contact angle (WCA), and droplet absorption time of the powder was observed when coating was applied. Furthermore, we observed an increase in the amount of Si-OH present on the particle surface with increasing coating cycles, while no significant improvement in water affinity was found after the first coating cycles. Our findings suggest that surface coverage is the primary factor in improving the colloid stability of particles, coated at low temperatures. The low temperature operation of our system introduced a chemical vapor deposition (CVD) component to our coating process, which allowed full surface coverage to be achieved within the first two coating cycles.
help_outline