Operating-window identification for magnetic density separation
Hongli Su (TU Delft - Civil Engineering & Geosciences)
Kunning Tang (University of New South Wales)
Max van Beek (TU Delft - Civil Engineering & Geosciences)
Peter Rem (TU Delft - Civil Engineering & Geosciences)
Zhenkai Bo (Heriot-Watt University)
Rajeev Bheemireddy (TU Delft - EMSD EEMCS Project engineers E)
Nishab Ali (TU Delft - Civil Engineering & Geosciences)
Yongli Wu (TU Delft - Civil Engineering & Geosciences)
Francesco Di Maio (TU Delft - Civil Engineering & Geosciences)
More Info
expand_more
Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.
Abstract
Magnetic density separation (MDS) can separate millimetre-sized non-ferromagnetic particles, although suitable combinations of magnet inclination (θ) and magnetic-liquid magnetization (Mf) depend on the separator geometry. We developed an operating map from a calibrated quasi-static density-matching model. Five measurements of magnetic-liquid density were interpolated piecewise linearly and combined with an exponential field-decay expression to calculate three bottom density-matching positions. Feasible conditions had to satisfy position ordering, tank and magnetic-field coverage, a 3.0 cm feed-zone boundary, and a minimum middle-product collection width of 0.45 cm. For θ = 12° and Mf = 5300 A/m, the calculated xh, xl, and Wm were 21.920, 27.577, and 5.656 cm, respectively. The tested input perturbations and grid refinements produced only small changes in the reported metrics. Three independent separation runs, with triplicate ICP measurements for each sample, demonstrated density-based product partitioning at the selected condition. Broader validation will require testing additional operating conditions.