Automated fabrication of shape models of free-form objects with a sculpturing robot

Doctoral thesis (1998)

Authors

JWH Tangelder (OLD) CITG Section Photogrammetry and Remote Sensing

Research Group

(OLD) CITG Section Photogrammetry and Remote Sensing

More Info

expand_more

To reference this document use:

http://resolver.tudelft.nl/uuid:2f881f04-5059-48e4-bfac-91b7f2223da5

Published Date

1998

Language

English

Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Research Group

(OLD) CITG Section Photogrammetry and Remote Sensing

Abstract

This thesis has resulted from the research project Rapid Prototyping using Virtual Reality and Robot Milling, which started in at the Faculty of Industrial Design Engineering of Delft University of Technology The project aimed at the development of both virtual and physical shape modeling techniques to support conceptual shape design The thesis focuses on the development of shape sculpturing as an advanced physical shape modeling technique using robot milling The technique has been implemented evaluated and applied on the Sculpturing Robot system at Delft University of Technology.