Experimental assessment of multi-phase flow distribution in an evaporator header through Design of Experiments techniques

Journal Article (2025)
Author(s)

Claretta Tempesti (von Karman Institute for Fluid Dynamics)

A. Lecardonnel (TU Delft - Flight Performance and Propulsion, von Karman Institute for Fluid Dynamics)

D. Laboureur (von Karman Institute for Fluid Dynamics)

Research Group
Flight Performance and Propulsion
DOI related publication
https://doi.org/10.1016/j.expthermflusci.2024.111359
More Info
expand_more
Publication Year
2025
Language
English
Research Group
Flight Performance and Propulsion
Bibliographical Note
Green Open Access added to TU Delft Institutional Repository 'You share, we take care!' - Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.@en
Volume number
162
Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Abstract

The uneven distribution of flow phases in evaporator channels can drop the heat exchanger efficiency up to 30%. Due to its dependence on the interaction of several coexisting variables – both geometry, operating conditions, and fluid properties – it is a complex phenomenon to analyze. Most studies focus on the effect of single parameters: this is an inefficient and expensive way of doing experiments, and the results lack in understanding how the combination of variables affects the flow distribution. This paper presents a methodology to optimally characterize and predict the distribution of flow phases in the channels of an evaporator header based on Design of Experiment (DoE) techniques. Despite the proven potential of DoE methods, they have never been applied in this field. Tests were conducted with an air–water mixture in the configuration horizontal header with vertical channels with downward flow, varying inlet pipe position, channels intrusion, presence of a splashing grid at the header inlet, and air and water flow rates. Results prove that, when working with complex processes, interaction effects between variables cannot be neglected as they significantly affect the response. The most affecting parameter was found to be the air flow rate, followed by the combination between inlet pipe position and presence of the splashing grid. With horizontal inlet, the optimal response was given by absence of intrusion, presence of the splashing grid, lowest water, and highest air flow rate. Instead, for the vertical case, the distribution was enhanced with the highest intrusion, absence of the grid, and highest water and air flow rates. Lastly a first attempt to model the process was performed. Even if a universal regression model has low accuracy (51%), restricting the area of analysis can result in valid predictive relations, with accuracies up to 91.4%.

Files

1-s2.0-S0894177724002280-main.... (pdf)
(pdf | 3.76 Mb)
- Embargo expired in 22-05-2025
License info not available