Interfacial fatigue debonding retardation in wrapped composite joints
Experimental and numerical study
W. Feng (TU Delft - Steel & Composite Structures)
Marko Pavlović (TU Delft - Steel & Composite Structures)
Mathieu Koetsier (TU Delft - Steel & Composite Structures)
Milan Veljkovic (TU Delft - Steel & Composite Structures)
More Info
expand_more
Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.
Abstract
Debonding crack propagation at the composite-to-steel interface has been found to be an important failure mechanism for wrapped composite joints under static and fatigue loads. Friction at the interface behind the crack tip may deviate fatigue debonding of the joints from the linear-fracture-mechanics behaviour. This paper presents static and fatigue tests of axial wrapped composite joints. 3D DIC and optical fiber system is employed to monitor displacements and crack propagation. A finite element model is established and validated against static and fatigue test results, where friction is considered at the cracked interface. Through FE modelling, it is proved that the friction at the interface significantly reduce the strain energy release rate (SERR) at the crack tip, leading to retardations of crack growth and stiffness degradation. Parametric study is conducted finally to investigate the influence of friction coefficient, failure modes as well as Paris relationship parameters on the predicted fatigue behaviour of wrapped composite joints.
help_outline