Tip vortex mitigation using slotted and flexible winglets
J. Srinivasan (TU Delft - Aerospace Engineering)
M. Li – Mentor (TU Delft - Aerodynamics)
B.W. van Oudheusden – Mentor (TU Delft - Aerodynamics)
F. Scarano – Graduation committee member (TU Delft - Aerodynamics)
L.L.M. Veldhuis – Graduation committee member (TU Delft - Flight Performance and Propulsion)
More Info
expand_more
Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.
Abstract
This thesis investigates the role of winglet slots in reducing tip vortices, inspired by bird wingtips. The effects of slotting and wingtip flexibility were analyzed using multiple bio-inspired models tested in a low-speed wind tunnel at Reynolds numbers from 2.9 × 10⁴ to 8.8 × 10⁴. Three experimental techniques were employed: force balance for aerodynamic force estimation, motion tracking of wingtip movement, and stereo PIV analysis to measure cross-flow planes in the winglet wake. Non-intrusive methods were used to estimate drag components based on PIV data and wake integral approaches. The slots significantly reduced induced drag by breaking down the tip vortex into smaller, weaker vortices. This breakdown was visualized using s-PIV results and analyzed through velocity component contours. The streamwise vorticity breakdown was examined in relation to wingtip flexibility, and the vortex cores' location and characteristics were analyzed, along with the phenomenon of vortex wandering.
By the end of the thesis, it was concluded that although slotted winglets reduced induced drag, they led to a significant increase in profile drag, resulting in higher overall drag compared to unslotted winglets. Additionally, the slots caused a loss in lift. The overall aerodynamic performance, measured by the lift-to-drag ratio, was also higher for the
unslotted winglet. Among the slotted winglets, static bending was common, while wingtip vibrations were minimal. The most flexible slotted winglet had the lowest induced drag. However, the results indicate that at very low Reynolds numbers, slotted winglets deteriorate the wing’s aerodynamic performance compared to unslotted ones. Among the slotted winglets, those with intermediate flexibility demonstrated the best aerodynamic performance, highlighting the importance of optimizing wingtip flexibility.