Investigation on energy director-less ultrasonic welding of polyetherimide (PEI)- to epoxy-based composites

Journal article (2019)

Authors

E. Tsiangou Aerospace Manufacturing Technologies - Aerospace Engineering
S. Teixeira De Freitas Structural Integrity & Composites - Aerospace Engineering
I.F. Villegas Aerospace Manufacturing Technologies - Aerospace Engineering
R. Benedictus Structural Integrity & Composites - Aerospace Engineering
Research Group
Aerospace Manufacturing Technologies (Aerospace Engineering) (TU Delft)
Polymer-matrix composites (PMCs) Thermoplastic resin Joints/joining Thermosetting resin
More Info
expand_more

Published Date

15-09-2019

Language

English

Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Faculty

Aerospace Engineering

Department

Aerospace Structures & Materials

Research Group

Aerospace Manufacturing Technologies

Abstract

In ultrasonic welding of thermoplastic composites an energy director (ED) (i.e. neat thermoplastic film), is used between the two adherends to be welded, to promote frictional and viscoelastic heating. For welding of thermoset composites (TSC), a thermoplastic coupling layer is co-cured on the surface to be welded as typical procedure to make the TSC “weldable”. This study focuses on investigating whether a polyetherimide (PEI) coupling layer by itself has the potential to promote heat generation during ultrasonic welding of CF/epoxy and CF/PEI samples, without the need for a separate ED, and if so, what thickness should that coupling layer be. The main findings were that welding without a loose ED resulted in overheating of the CF/PEI adherend and/or coupling layer due to the inability of the latter to promote heat generation efficiently. However, welding of CF/epoxy and CF/PEI samples with the use of a loose ED resulted in high-strength welds.