Geopolymer materials based on natural zeolite
A. Nikolov (University of Architecture, Civil Engineering and Geodesy)
Ivan Rostovsky (University of Architecture, Civil Engineering and Geodesy)
Henk W. Nugteren (TU Delft - ChemE/Product and Process Engineering)
More Info
expand_more
Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.
Abstract
One of the potential raw materials for preparation of geopolymers is the natural zeolite. In the present report, the used natural zeolite (clinoptilolite) is from huge deposit near Beli Plast, Bulgaria. Geopolymer pastes and mortars are prepared by using three different alkaline activators—sodium hydroxide, sodium silicate and sodium carbonate. The hardened geopolymers are tested for determination of mechanical properties by traditional standardized methods. The structure and the composition of the materials are studied by direct physical methods—X-ray diffraction (XRD), thermal analysis (DTA and TGA) and scanning electron microscopy (SEM). The results show variable degree of dissolutions of the raw zeolite material when using different activators and formation of solid geopolymer materials with qualitatively different structure. Despite its relatively low compressive strength, geopolymers based on natural zeolite cured at room temperature and used as coating, show very good adhesion to concrete.
help_outline