Experimental investigation on the effect of dimple-protrusion surfaces in a counter flow heat exchanger
S.M. Tinwala (TU Delft - Mechanical Engineering)
R Delfos – Mentor (TU Delft - Support Process and Energy)
Jurriaan W.R. Peeters – Mentor (TU Delft - Energy Technology)
Jens Kitzhofer – Graduation committee member (Apex Group)
More Info
expand_more
Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.
Abstract
Flat plate heat exchangers are widely used in industrial and domestic applications. Industrial plate type heat exchangers generally operate in the turbulent flow regime. Although, increase in flow speeds leads to higher transport of heat, it also causes a rise in the pressure loss which is undesirable. Therefore, to combat the problem of high pressure drop, this thesis explores the use of a passive enhancement technique to improve heat transfer. The aim of this thesis is to experimentally investigate the effect of dimple-protrusion surfaces in a counter flow type heat exchanger. The flow behavior is studied using Laser Doppler Anemometry and the local heat transfer characteristics are investigated with the help of Infrared thermography. The average Nusselt number and friction factor data is compared with those of a flat plate and it is found that the use of dimple-protrusion surfaces provide maximum improvement in the performance of the heat exchanger by 21% in the laminar-to-turbulent transition regime, at Reynolds number of approximately 2900.