Modelling of membrane bonding response

Part 2 finite element simulations of membrane adhesion tests

Journal Article (2020)
Authors

X Liu (TU Delft - Pavement Engineering)

C. Kasbergen (TU Delft - Pavement Engineering)

Jinlong Li (TU Delft - Sanitary Engineering)

A Skarpas (TU Delft - Pavement Engineering)

G. Tzimiris (TU Delft - Pavement Engineering)

Research Group
Pavement Engineering
Copyright
© 2020 X. Liu, C. Kasbergen, J Li, Athanasios Scarpas, G. Tzimiris
To reference this document use:
https://doi.org/10.1080/10298436.2020.1763993
More Info
expand_more
Publication Year
2020
Language
English
Copyright
© 2020 X. Liu, C. Kasbergen, J Li, Athanasios Scarpas, G. Tzimiris
Research Group
Pavement Engineering
Issue number
3
Volume number
23
Pages (from-to)
626-637
DOI:
https://doi.org/10.1080/10298436.2020.1763993
Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Abstract

The adhesive bonding strength of the membrane layers between the asphalt concrete surface layers and the decks of steel bridges has a strong influence on the fatigue life of orthotropic steel deck bridges (OSDBs). The interfacial properties between the membrane and the layers bonded to it have not been extensively studied in the current orthotropic steel deck bridge system. For the adequate characterisation of the adhesive-bonding strength of various membranes and surrounding materials on OSDBs and for the collection of the necessary parameters for finite element model, details of the membrane adhesion test (MAT) are introduced and simulated by using the adhesive traction-separation interface element which was developed in a companion paper to this contribution (Liu, X., Kasbergen, C., Li, J., & Scarpas, A. (2019). Modelling of membrane bonding response: part 1 development of an adhesive contact interface element. International Journal of Pavement Engineering). Parametric studies of the adhesive contact element utilised for modelling the membrane bonding layer in the MAT test have been performed on the basis of the combination of different critical strain energy release rates and the characteristic opening length in the constitutive model. Comparison of membrane deformation profiles and the in-time debonding force distribution between experimental observations and finite element simulations have been presented.