Effect of curing methods during a long time gap between two printing sessions on the interlayer bonding of 3D printed cementitious materials
Yu Chen (TU Delft - Materials and Environment)
Ze Chang (TU Delft - Materials and Environment)
Shan He (TU Delft - Materials and Environment)
O Copuroglu (TU Delft - Materials and Environment)
Branko Šavija (TU Delft - Materials and Environment)
H.E.J.G. Schlangen (TU Delft - Materials and Environment)
More Info
expand_more
Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.
Abstract
A good bond between the layers of 3D printed cementitious materials is a prerequisite for having high structural rigidity for the printed elements. However, the influence of printing process on an interlayer bond is still not well understood. This study investigates the influence of curing methods (i.e., air curing, plastic film covering, wet towel covering and water mist-30 min/-60 min) on the interlayer bonding characteristics of 3D printed cementitious materials for a long time interval between two printing sessions. Results showed that the interlayer bonding could be improved by covering the substrate with a plastic film or a wet towel. However, applying water mist every 60 min/30 min on the deposited layer was detrimental to the interlayer bonding. Furthermore, the interlayer bond strength of studied specimens appeared to be dominated by the mechanical strength of the cementitious matrix at the interface rather than its air void structure. Therefore, covering unfinished printed elements with plastic film or wet towels can be a practical solution to maintain a sufficiently humid environment during long waiting periods, which is vital for its interlayer adhesion.
help_outline