Enhancing internal curing of alkali-activated slag mortar through activator pre-soaking of lightweight aggregates

Journal Article (2026)
Author(s)

Zheng Liu (Harbin Institute of Technology Shenzhen)

Chen Liu (TU Delft - Civil Engineering & Geosciences)

Jiaxin Zhang (Harbin Institute of Technology Shenzhen)

Shiwen Han (Harbin Institute of Technology Shenzhen)

Guang Ye (TU Delft - Civil Engineering & Geosciences)

Zhenming Li (Harbin Institute of Technology Shenzhen)

Research Group
Materials and Environment
DOI related publication
https://doi.org/10.1016/j.conbuildmat.2026.148119 Final published version
More Info
expand_more
Publication Year
2026
Language
English
Research Group
Materials and Environment
Journal title
Construction and Building Materials
Volume number
543
Article number
148119
Page Views
12
Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Abstract

This study proposes a novel strategy in which lightweight aggregates (LWAs) are pre-soaked in the alkaline activator, enabling them to function simultaneously as internal curing reservoir and reactive participants in alkali-activated slag (AAS) mortar. Owing to the improved chemical compatibility between the stored liquid and the surrounding pore solution, activator pre-soaking reduced reaction retardation and promoted a more gradual and sustained liquid release compared with conventional water pre-soaking. Consequently, self-desiccation and the associated autogenous shrinkage were more effectively mitigated. The restrained cracking tendency of AAS mortar was also markedly reduced, accompanied by a transition in the post-peak fracture response from brittle to more ductile behaviour. In addition, the latent reactivity of the LWA was exploited through the release of Si and Al species, which promoted reaction-product formation and densification near the LWA-paste interface. As a result, the lack of measurable 1-day strength observed with water pre-soaking was largely overcome, and the elastic modulus was better preserved. These findings, together with the simplified practical implementation of this method, support activator pre-soaking as a promising preconditioning approach for LWA-incorporated AAS systems.

Files

– Personal use only – Dutch Copyright Act (Article 25fa)
warning

File under embargo until 24-03-2027