Advancing the Distinct Element Modelling of Masonry Structures

A Joint Constitutive Model for Cracking, Shearing, and Crushing Under Cyclic and Dynamic Loading

Doctoral Thesis (2026)
Author(s)

Y.P. Oktiovan (TU Delft - Civil Engineering & Geosciences)

Contributor(s)

J.G. Rots – Promotor (TU Delft - Civil Engineering & Geosciences)

F. Messali – Copromotor (TU Delft - Civil Engineering & Geosciences)

Research Group
Applied Mechanics
DOI related publication
https://doi.org/10.4233/uuid:b11cc807-d655-4e33-82e0-2934cd994b5f Final published version
More Info
expand_more
Publication Year
2026
Language
English
Defense Date
24-11-2026
Awarding Institution
Delft University of Technology
Research Group
Applied Mechanics
ISBN (print)
978-94-6518-484-5
Page Views
43
Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Abstract

Unreinforced masonry is vulnerable to horizontal actions such as earthquakes. In the Groningen region of the Netherlands, induced seismicity has exposed a building stock that was never designed for seismic demand. Full-scale testing is too costly to cover the diversity of this stock, so its assessment relies largely on numerical models. Such models must reproduce how masonry fails: cracks open along the mortar joints, units slide past one another, and the material crushes under high compression. Continuum models smear these discontinuities over the material and struggle to follow them up to collapse. The distinct element method (DEM) instead represents masonry as an assembly of blocks connected by zero-thickness joints. It therefore reproduces the opening, sliding and re-contact of the units directly, up to collapse. Its accuracy, however, depends on the constitutive law at the joints. The contact models available in explicit DEM soften linearly or not at all, and they unload along fixed stiffnesses, whatever the failure mode.

This dissertation develops MASON (Masonry Advanced Softening cONtact), a contact constitutive model for DEM implemented in 3DEC. MASON combines a tension cut-off, a Coulomb friction surface and an elliptical compression cap within multi-surface plasticity. Tensile and shear strengths soften exponentially according to the mode-I and mode-II fracture energies, and the dilatancy decays with plastic slip. In compression, a hardening and softening law is calibrated to the compressive fracture energy. Unloading and reloading rules differ by failure mode: elastic in shear, secant in tension and nonlinear with a plastic offset in compression.

The model is validated from the bottom up. At the material scale, it reproduces couplet, triplet, bending and compression tests. At the component scale, it reproduces the failure modes of walls under monotonic and cyclic loading, including piers retrofitted with steel frames. For dynamic analysis, a Maxwell damping formulation is adopted, with its parameters identified by a Levenberg–Marquardt routine to give a nearly uniform damping ratio over a frequency band. On shake-table tests of a cross-vault and of gable walls, the choice of damping scheme and the choice of contact law both mainly affect the accelerations, and the two should be selected together. On the gable walls, the model reproduces the collapse intensities with a single material parameter set. At building scale, the model reproduces the peak capacity and the cyclic response of a full-scale calcium silicate house. An exploratory dynamic analysis estimates the near-collapse intensity of this house and shows that a steel-frame retrofit raises it by a factor of about 1.8 without changing the collapse mechanism.

MASON is released openly for further use and development.

Files

License info not available