Analysis of five-point bending test for multilayer surfacing system on orthotropic steel bridge

Conference paper (2013)
Department
Structural Engineering (CEG) (TU Delft)
Copyright: © 2013 The Authors
Five-point bending test, orthotropic steel deck bridge, surfacings, membrane, finite element analysis
More Info
expand_more

Published Date

17-01-2013

Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Source:

912th Annual Meeting Transportation Research Board, Washington, USA, 13-17 January 2013; Authors version

Faculty

Civil Engineering and Geosciences

Department

Structural Engineering

Abstract

The French five-point bending test (5PBT) provides a laboratory scale test that allows studying the fatigue resistance of surfacing systems on orthotropic steel deck bridges (OSDB). The surfacing structure for OSDB in the Netherlands consists mostly of multilayer system: top porous asphalt layer, guss asphalt layer, steel deck and two membrane layers. In this paper, an analytical solution for 5PBT setup is presented first. In order to better understand the influence of geometrical, mechanical and structural parameters on the performance of the typical multilayer surfacing system of OSDB in the Netherlands, the 5PBT specimens with five structural layers have been investigated. The parametric study is performed at the numerical platform CAPA-3D that was developed at the Section of Structural Mechanics of TU Delft. The thicknesses of the top porous asphalt layer, middle guss asphalt layer and the steel plate are varied. The influences of the mechanical properties of both top and bottom membrane layers are studied. The sensitivities of those influence factors are evaluated by the examination of the maximum tensile stress at the top surface of the porous asphalt layers and the strain distributions through the entire thickness of the specimen at two cross sections.

Files

291234.pdf
(pdf | 0.911 Mb)