How to handle the Hydrogen enriched Natural Gas blends in combustion efficiency measurement procedure of conventional and condensing boilers

Journal article (2017)

Authors

Gianluigi Lo Basso Sapienza University of Rome
B. Nastasi Building Physics - Architecture and the Built Environment
Davide Astiaso Garcia Sapienza University of Rome
F. Cumo Sapienza University of Rome
Research Group
Building Physics (Architecture and the Built Environment) (TU Delft)
Condensation Boiler efficiency Hydrogen enriched Natural Gas Mixtures combustion Ostwald charts Pollutants measurement
More Info
expand_more

Published Date

2017

Language

English

Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Faculty

Architecture and the Built Environment

Department

Architectural Engineering +Technology

Research Group

Building Physics

Abstract

This paper focused on the hydrogen-methane mixtures (H2NG) implications on end-user devices such as boilers, so as to provide a useful tool for maintenance operators. In detail, according to current standards, H2NG blends characteristics parameters for boilers combustion efficiency measurement are calculated. Then, the Ostwald chart for each blend is built by the analytical procedure and is plotted. Additionally, the chemical equations as well as the blended gas characteristic values are computed in order to implement them within software library of commercial gas analysers. Indeed, they are commonly based on Ostwald combustion equation for correlating CO, CO2 and O2 concentrations. The results can be applied to analyze conventional and widespread domestic boilers fueled with H2NG addressing all of the technical implications for their performance certification when they are operating also in condensing mode. Air excess and relative humidity are chosen as variables to evaluate their effects on boilers performance. The oxygen concentration ranges from 0% vol. up to 15% vol. The specific heat values drop non-linearly down for each mixture, showing a maximum reduction equal to 9.825%, for H2NG@30%. A maximum Energy Fraction of Condensation (EFC) enhancement of 0.9% points is noticed for H2NG@30% vol. While, the highest EFC gain, 4.8% points, occurred at relative humidity of 90% compared to the assumed reference values for calculations.