Flow patterns in partially vegetated channels

Combining physical experiments and numerical modelling

Master thesis (2017)

Authors

Y. Zhu Civil Engineering & Geosciences

Contributors

Qinghua Ye (supervisor 1)
S. Truong Hong (supervisor 1)
S.G.J. Aarninkhof (supervisor 2)
W.S.J. Uijttewaal (supervisor 2)
M.J.F. Stive (supervisor 2)
Faculty
Civil Engineering & Geosciences
Copyright: © 2017 Yunze Zhu
Numerical Modelling Flume experiments Mangroves
More Info
expand_more

Published Date

30-08-2017

Language

English

Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Faculty

Civil Engineering & Geosciences

Abstract

As coastal wetland ecosystems, thriving at the interface between land and water,
mangroves can benefit us in lots of ways: providing food and timber, purifying water and sequestrating carbon, protecting coastal area through wave attenuation and coastal stabilization. Regarding the protection of coastal area, mangroves damp the flow in short term and mitigate coastal erosion in long term.
In mangrove forests, the capability of mangroves to capture sediments leads to
accumulation of sediments within the mangrove forests. Hence, the elevation of the floodplain, where the mangroves grow, is usually higher than the main river bed. The slope connecting the main river channel and floodplain has been found with different angle. The topography of the mangrove area is influenced by both sediment dynamics and hydrodynamics. The physical processes behind this is still not fully understood. This study aims to study the hydrodynamics in a partially vegetated compound channel by using the 2DH RANS model in Delft3D and to verify to what extend the flow characteristics can be reproduced. The reference numerical model is set up to mimic the flume experiments so that the model can be calibrated. The influence of different physical and environmental parameters on flow characteristics is studied. Also, the limitation of Delft3D in simulating the flow in a partially vegetated compound channel has been found.