Photoelectrochemical water splitting with porous α-Fe2O3 thin films prepared from Fe/Fe-oxide nanoparticles

Journal article (2016)

Authors

S. Emin University of Nova Gorica
M. de Respinis ChemE/Materials for Energy Conversion and Storage - AS
T. Mavrič University of Nova Gorica
B. Dam ChemE/Materials for Energy Conversion and Storage - AS
M Valant University of Electric Science and Technology of China, Chengdu, University of Nova Gorica
W.A. Smith ChemE/Materials for Energy Conversion and Storage - AS
Research Group
ChemE/Materials for Energy Conversion and Storage (AS) (TU Delft)
More Info
expand_more

Published Date

05-08-2016

Language

English

Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Faculty

Applied Sciences

Department

ChemE/Chemical Engineering

Research Group

ChemE/Materials for Energy Conversion and Storage

Abstract

We report on the photoelectrochemical (PEC) performance related to water oxidation of porous hematite (α-Fe2O3) thin films, which were prepared by spin coating of colloidal core/shell Fe/Fe-oxide nanoparticles (NPs) on fluorine-doped SnO2 (FTO) substrates. Oxidation of the obtained Fe/Fe-oxide films at 600 °C, 700 °C, and 800 °C in air yielded porous α-Fe2O3 thin films. The advantage of using Fe/Fe-oxide NPs is that they form stable suspensions in organic solvents and are suitable for spin coating. The highest photocurrent density of 0.75 mA/cm2 at 1.23 V (vs. a reversible hydrogen electrode, RHE) was achieved with an α-Fe2O3 thin film calcined at 800 °C. Incident photon-to-current conversion efficiency (IPCE) data showed that the quantum efficiency of the thin films was about 15% at 350 nm at an applied bias of 1.4 V vs. RHE. To improve the oxygen evolution reaction, we electrodeposited a Ni(OH)2/NiOOH catalyst (given as NiOOH) onto the α-Fe2O3 film and achieved the reduction of onset potential from 0.85 to 0.69 V vs. RHE. Electrochemical impedance spectroscopy and open-circuit photovoltage (OCP) measurements were used to estimate the flat-band potential of the thin films.