Towards improved orthopaedic drilling at hard to reach bone sites

The design of a compact Self-Feeding Angled Drill Attachment (SFADA)

Master Thesis (2020)
Author(s)

J. van der Laan (TU Delft - Mechanical Engineering)

Contributor(s)

J. W. Spronck – Mentor (TU Delft - Mechatronic Systems Design)

Faculty
Mechanical Engineering
Copyright
© 2020 Jorik van der Laan
More Info
expand_more
Publication Year
2020
Language
English
Copyright
© 2020 Jorik van der Laan
Graduation Date
27-05-2020
Awarding Institution
Delft University of Technology
Programme
['Mechanical Engineering | Mechatronic System Design (MSD)']
Faculty
Mechanical Engineering
Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Abstract

Bone drilling is a crucial part of orthopaedic surgery. Internal fixation is a ommon orthopaedic procedure that requires drilling to improve healing of bone fractures. Tight spaces around hard to reach bone fractures impede the surgeon during the procedure. As a result there is an increased risk of complications such as thermonecrosis, overshoot into soft tissue, micro-crack formation and drill bit breakage. Therefore, a novel procedure is proposed, where drilling is done using a compact Self-Feeding Angled Drill Attachment (SFADA). The SFADA is a crucial part of the new procedure, because it can generate a controlled feed in a onfined space. Four concepts were developed that met these functionalities. Based on the design specifications a final concept was selected. The concept based on a differential thread and a lead/lag bevel gear was deemed the most feasible. Materials and dimensions were assigned to the mechanism based on an analysis of the critical components. A compact demonstrator of 80x40x36 mm was built. Measurements were performed and the results showed the SFADA’s ability to perform controlled drilling in a confined space. Furthermore, the SFADA can generate a speed of 1500 rpm and feed of 1.5 mm/s, with load forces and torques up to respectively 20 N and 0.2 Nm. The design of the SFADA is an important step in the improvement of bone drilling at hard to reach bone sites.

Files

Master_Thesis_Jorik_van_der_La... (pdf)
(pdf | 5.33 Mb)
- Embargo expired in 27-07-2021
License info not available