Heating system based on heat recovery from sewage

Conference paper (2021)

Authors

M. Avadhani Student
Roland van Rooyen City of Rotterdam
C.A. Infante Ferreira Engineering Thermodynamics - Mechanical, Maritime and Materials Engineering
Research Group
Engineering Thermodynamics (Mechanical, Maritime and Materials Engineering) (TU Delft)
Copyright: © 2021 M. Avadhani, Roland van Rooyen, C.A. Infante Ferreira
Heat pump Enhanced polymer Sewage heat recovery Building heating systems
More Info
expand_more

Published Date

2021

Language

English

Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Faculty

Mechanical, Maritime and Materials Engineering

Department

Process and Energy

Research Group

Engineering Thermodynamics

Abstract

Buildings consume 40% of the total global energy and contribute to over 30% of all CO2 emissions. Space heating forms a significant part of energy consumption in buildings. A possible solution is to recover waste heat from sewage and to upgrade its exergy using a heat pump. Polymers reduce cost and energy required for manufacturing the heat exchangers. The impact of sewage flow and temperature, heat exchanger dimensions and thermal enhancement of polymers on heat recovery is studied using a Matlab model. The model integrates a sewage heat exchanger with a heat pump and optimizes heat recovery from sewage. A heat pump is used to obtain hot water at 55°C for space heating. Heat recovered from sewage and overall COP are quantified. In case of HPDE with graphite filler, increase in filler content from 0% to 30% increases thermal conductivity from 0.46 to 1.89 Wm-1K-1 increasing the heat recovery with 34%. The heat transfer coefficient becomes twice as large when polymer with no filler is enhanced with 30% filler content. Large heat exchange area and variability of sewage level limit the recovered heat.

Files

HPC2021_307.pdf
(.pdf | 1.09 Mb)