Radio Frequency Identification in the Operating Room: A systematic approach to test the feasibility of RFID in the operating room for surgical phase recognition

More Info
expand_more

Abstract

Hospitals are facing enormous financial pressure over the last years. To achieve lower costs, hospitals should invest in smart ways of working to make optimal use of the scarce capacities. A solution can be digitising processes in the hospital to prevent it from making more costs. In line with this founding, planning and scheduling of the operating room (OR) program during a day is a process that could be improved by digitising. Overtime and idle time are consequences of inaccurate planning and are both expensive elements that do not contribute to satisfaction of hospital personnel and patients. Radio Frequency Identification (RFID) is proven and proposed in previous research to be used to acquire data for surgical phase detection. Up until now, the detection accuracy for this model is too low and requires optimization before it can be implemented in the OR. This research uses a systematic approach to investigate the feasibility of implementation of RFID in the OR in Reinier de Graaf Gasthuis (RdGG) in Delft for the purpose of surgical phase recognition. The systematic approach is divided in four parts: theory, design, testing and evaluation. The first part presents an analysis of the OR in RdGG and the RFID technology and is used in the design part to compile a list of of design requirements. This list presents criteria that must be met in order to achieve succesful implementation of RFID in the OR. Based on the requirements an optimal position of the antenna is chosen above the surgical table, in the center of the plenum ventilation area and on a distance of 1.5 meter of the surgical table. On the basis of the optimal antenna position, an antenna, tag and reader is chosen. The proposed RFID system is tested in the MISIT-lab at the TU Delft and in an OR in RdGG. The goals of the experiments were to visualise the detection field and to compare the effect of the environment on the RFID performance. In the MISIT-lab, the antenna was able to detect a vast majority of tags up to a perpendicular distance (from the antenna to the surgical table) of 1.3 meter. At longer distances of 1.4 and 1.5 meter the antenna was still able to detect tags but to a lesser extent. The OR experiment yielded poor results compared to the laboratory experiment. None of the tags was detected on the predeterimined distances. The antenna was only able to detect tagged instruments on a distance of approximately 0.8 meter. The results are evaluated in the last part of this research. Normally, when facing poor performance of an RFID system the performance can be improved by increasing the antenna gain or choosing stronger RFID tags. These choices are both constrained by the dimensions of the antenna and the tag. An RFID antenna with a large surface cannot be placed in the airflow above the surgical table because this increases the risk on infections and large RFID tags do not fit on surgical instruments. The most probable reason for the decrease in performance between the two experiments is electromagnetic noise from surrounding electrical equipment and wires in the floor and ceiling. In conclusion, it is not possible to implement an RFID system in the OR for phase recognition purposes. RFID technology is fast evolving and new technologies can offer a solution. It is certainly possible that RFID can be implemented in the future when tags and antennas are more powerful while retaining small dimensions. In future, it is recommended to perform on site tests of RFID in the OR before further developing an application.