Pre-treatments to enhance the biodegradability of waste activated sludge
Elucidating the rate limiting step
A. Gonzales (TU Delft - Sanitary Engineering)
A.T.W.M. Hendriks (TU Delft - Sanitary Engineering)
Jules B. van Lier (TU Delft - Sanitary Engineering)
MK Kreuk (TU Delft - Sanitary Engineering)
More Info
expand_more
Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.
Abstract
Pre-treatments for waste activated sludge (WAS) are, in most cases, an attempt to increase the biodegradation and/or improve hydrolysis rate of WAS after anaerobic digestion. This review presents an extensive analysis of WAS pre-treatments effectiveness focusing on increasing the biodegradability. In the first part of the review, WAS is considered as a cluster of organic components: proteins, carbohydrates, humic substances and cells. Based on this breakdown into components, the effect of different pre-treatments on each component (and in combination) is described. Also, possible reasons for the contradictory results frequently found among different studies dealing with the same pre-treatment are included. In the second part, the review describes the effects on volatile solids removal by digestion after pre-treatment and on the dewaterability of the final digestate. The energy balance and potential limiting factors for each pre-treatment are also taken into account. From the published works it is concluded that some pre-treatment techniques, such as thermal hydrolysis, thermal phased anaerobic digestion and low-temperature pre-treatment are effective ways to increase energy production and to improve other sludge properties, such as dewatering. However, these techniques are very energy intensive and require a large capital outlay, so research on milder pre-treatment techniques is valuable.