Background Calibration Of Wideband Hall Effect Current Sensors
Stabilizing The Gain Of Hall Effect Sensors Using Magnetic Feedback
J.D. Groeneveld (TU Delft - Electrical Engineering, Mathematics and Computer Science)
A.J.M. Montagne – Mentor (TU Delft - Electrical Engineering, Mathematics and Computer Science)
C.J.M. Verhoeven – Mentor (TU Delft - Electrical Engineering, Mathematics and Computer Science)
Gert van der Horn – Mentor (SystematIC design b.v.)
K.A.A. Makinwa – Graduation committee member (TU Delft - Electrical Engineering, Mathematics and Computer Science)
More Info
expand_more
Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.
Abstract
With a global demand for wideband current sensing, Hall sensors remain an attractive solution due to their CMOS integration. The accuracy of these sensors is notoriously poor over both lifetime and temperature. Existing attempts at improving sensor accuracy have lead to both feedforward and feedback approaches. Feedforward implementations hereby linearize the gain by a reference transfer. The sensor systems have excellent steady-state performance, however in this work the dynamic performance of these sensor systems is challenged. In this thesis the sensitivity drift is characterized, and a relation between temperature-induced sensitivity drift and the calibration interval is set. Common implementations chop the reference field and place it outside the signal bandwidth. However, in wideband systems, e.g. coil-Hall hybrid sensors, this is difficult to guarantee. Differential mode reference field measurement suppresses the input signal, however are limited by sensitivity mismatch and current rail misplacement. The solution to this is to modulate the reference field with a direct sequence spread spectrum signal, hereby making the calibration loop insensitive to any specific frequency. The result is a wideband current sensor with a drift of less than $1\,\%$, achieved by linearizing its gain to a known reference resistance. However, implementing a low-drift reference resistance remains a significant challenge in standard CMOS processes.
Files
File under embargo until 17-09-2028