High Conversion Ratio Hybrid Boost Converter

Master thesis (2023)

Authors

Y. CHIU Electrical Engineering, Mathematics and Computer Science

Contributors

Q. Fan Microelectronics (supervisor 1)

H. Ma Microelectronics (supervisor 1)

Marco Berkhout Goodix Technology (supervisor 2)

Faculty

Electrical Engineering, Mathematics and Computer Science

More Info

expand_more

To reference this document use:

http://resolver.tudelft.nl/uuid:32ada48b-2824-42bb-89a7-0e498ed24aa9

Published Date

20-04-2023

Language

English

Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Faculty

Electrical Engineering, Mathematics and Computer Science

Abstract

DC-to-DC converters have been used in portable electronic applications such as laptops and mobile phones where power efficiency is very important. In these applications, basic converters like buck and boost converters are used. However, the conversion ratio of conventional boost converters is not high. To achieve a high conversion ratio, the duty cycle of the conventional boost converters must be increased drastically, which increases the conduction loss. This thesis presents a topology to tackle this issue. A control system is designed and the pulse frequency modulation (PFM) method is used. In this thesis, a complete analysis of this topology, such as efficiency evaluation and stability analysis, is provided. This circuit is designed in 180nm BCD technology. Simulation results show it has a wide load range (0 to1.8A), high line regulation 0.8%/V, load regulation 2.9%/A, while achieving 88.1%, 93.0%, and 94.8% when CR = 5, CR = 4.5, and CR = 3.7, at 𝐼𝑜𝑢𝑡= 1.2A respectively.